Counting matching models…
Great job to the original designer, good fit around the screen and particularly how tight to the LEDs it is. The only issue I had was the screen's ribbon cable and ground cable had no room to squeeze by. I could mount the original, but I…
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for one variant
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Little known fact: I bought my first 3D printer so that I can print leather embossing stamps. This actually works pretty well if you are interested in it yourself. So to go back to my roots for a bit – and fitting with the Catch-All Trays…
This model is compatible with the lego system.
This the official file for the mini fender to use with the latest Fungineers front and rear footpad.
This model is compatible with the lego system.
-update- There is a newer version of this mold that uses a different core technique. https://www.printables.com/model/666103 ------------ This is a set of molds, cores and jigs to make your own molded carbon fiber rudder for an IOM or…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I wanted to make a custom molded hard shell holster for my 31K-H311 nerf gun, and thought that making it similar to how real kydex or leather holsters are made would actually be really easy. Hardware required: Lighter/heat gun/blow dryer…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
This model is compatible with the lego system.
Uses the injection molded M18 terminal blocks you find on aliexpress. I left the block unretained so it's up to you to suit it to your needs. Glue would probably work. https://www.aliexpress.us/item/3256807387449540.html? If you want a…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Nachdem ich ein originalen Y Frame für meinen FYSETEC Drucker habe, musste ich einen remix au
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This solves a problem with the MMU3's “injection molded spool holders” which are, in my opinion, inherently unstable . Due to the complexity of the five-spool setup and multiple moving/unconstrained parts, the spools have a tendency to…
Tolerance test on the thread of a screw and bolt, for resin printer. Dado 1 / Vite 1 = Tollerance 0,10 mm (0.05 mm Dado / 0.05 mm Vite), Screw Pitch = 2 mm Dado 2 / Vite 2 = Tollerance 0,10 mm (0.05 mm Dado / 0.05 mm Vite), Screw Pitch =…
An adapter plate that allows the use of the newer injection molded spool holders on the Sumo enclosure. I did have to drill out the holes on the injection molded parts, as they use M4 screws, and the Sumo uses M5 on everything.
Bottom is hollow with 3.2mm walls (results in 100% plastic with 4 perimeters and a 0.4mm nozzle). I filled the bottom with plaster, you could use concrete, sand, metal balls,… to make it hard and heavy. Top cover is press fit; I secured…
Supports may be needed. Model in photo was printed in TPU, Clear PETG, with PLA supports.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
The design of this part was driven by the need to minimize friction between the holder wheels and the spool. When manually rewinding filament between spools to create longer samples, I often encountered issues at higher speeds where the…
This project has the goal of teaching you the basics of custom urethane pouring while making some really grippy wheels for the XRP kit! I have attached some images of tires I have made for both this project as well as other projects to…
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Remarks The new location…
The initial intent was to make a lamp My first trial failed. The top was bad. I had the idea to flip it bottom up and I obtained a nice vase. The tricky part on this one is the top. I had to cast a silicone mold in my 3D printed design,…
Just something I made in Fusion 360 to hold my shampoo upside down. Printed in PETG top down, no supports .2mm layers. Works as expected.
Added a cutout for the USB stick on my October 2025 Prusa XL with injection molded display.
Just something I made in Fusion 360 to hold my conditioner upside down. Printed in PETG top down, no supports .2mm layers. Works as expected.
This magazine is designed to be as close to a standard Worker talon magazine as possible. It's easy to print and assemble. It's been tested in a large range of blasters and should fit anything that also fits a Worker talon mag. Durability…
The most important thing you should do: Is print ONE of the bearing caps. Test it on your bearing, if its too big, scale it down. 0.1 makes a HUGE difference, I recommend scaling between 0.02 - 0.04, once you get it right, use the 20…
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Some spools are less wide…
Upgrades to the Savage 110 Hogue Overmolded Stock Front Bag Rider: Angled precisely to keep the barrel level. Remove the front swivel stud. Secure the front rider with a 10-32x3/4" or 5/8" socket head and flat washer. Change direction of…
This is a mold that i made for a Low Pressure Injection Molding system (I also designed and manufactured) This could be printed and used for molding other plastics. This also includes vent holes for injection. when fully printed, use the…
This is like my triskelion in that the 3D print is not the final result but the first step in the process. I have streamlined this into the easiest resin project I could come up with. The most complex part, assembling the tesserae , is…
All reference frames: left, right, front (lower), back (upper) are relative to a person standing in front of the machine. I printed this on a Prusa XL with standard .4mm nozzles using .15 layers and first layer in PrusaSlicer. The…
INTRODUCING SCRAP-ATTACK! Scrap-attack is a battle top designed specifically for the battle top contest here on Printables July 2026. It features a "blade" disk that is made of compression molded printing scraps that you can make with a…
This model is compatible with the lego system.
The initial intent was to make a lamp My first trial failed. The top was bad. I had the idea to flip it bottom up and I obtained a nice vase. The tricky part on this one is the top. I had to cast a silicone mold in my 3D printed design,…
This is a mold that i made for a Low Pressure Injection Molding system (I also designed and manufactured) This could be printed and used for molding other plastics. This also includes vent holes for injection. when fully printed, use the…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is like my triskelion in that the 3D print is not the final result but the first step in the process. I have streamlined this into the easiest resin project I could come up with. The most complex part, assembling the tesserae , is…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I created a stand for molded fishing lures to dry and cool after production. The base frame holds a cardboard that I used from some of my empty Kingroon filament spools to catch waste. Top and base frame are connected by a pole of 8mm…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Someone who collects Union Plastic's Blow Molded animals for the lawn asked if I could print something to replace all the missing stands. As I am from Leominster where all the animals were made (home of the Pink Flamingo lawn decorations)…
Our kitchen drawer has a molded insert. I hate to see good knives being abused, so I designed a small parameterized horizontal knife block. In the customizer, “flat width” and “flat length” refer to bottom flat surface of the molded…
When my cables damaged inside molded usb cable i destroyed molded part and saved connector. I repaired cables and fix the connector. This replacement part fits tightly. Fit the shell to cable then solder cables to usb connector and use a…
A support free modular molded frame for all your artwork you can assemble part to make a frame for artwork from size A6 to technicaly A0 (tested only up to A4). Printed in PLA at 0.2mm, 10% infill and 3 wall No support needed, might need…
