Prusa MK3/S/S+ Stumpy LCD Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
If your printer is in a depth-challenged enclosure this mod might be for you. This mod reduces the depth of the display support brackets from 65mm to 52mm, bringing the display unit flush with the printer frame. The display angle is not changed.
Hardware Notes:
Uses the same nut size as stock supports
Consider using a shorter bolt (15-20mm length recommended)
Trade-off: The stock supports position the LCD forward to maintain visibility when viewing from below the build plate. This mod sacrifices that forward positioning for a more compact footprint. You may lose screen visibility when the printer is below eye level and the build plate is at the front (Y0 position). This is typically an acceptable compromise for fitting into tighter enclosures:
