TRHEAD ADAPTER FOR AIRSOFT PISTOLS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a thread adapter 12mm CCW to 14mm CCW that can be used in most airsoft pistol threaded barrels so you can use yo
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 55
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
3D model description
This is a thread adapter 12mm CCW to 14mm CCW that can be used in most airsoft pistol threaded barrels so you can use your universal flash hiders or DINOPRODUCTIONS ones
!THIS IS FOR AIRSOFT OR MILSIM ONLY! (U CAN USE IT FOR REENACTMENT)
3D printing settings
My advice so you can get the best quality on this print on Cura 5.3.1
- Layer Height: 0.16mm
- At least 3 perimeter lines, Top and Bottom as well.
- Infill: 50% Cubic
-Horizontal expansion -0.1mm
- Hole Expansion: 0.2mm
- Print speed: 80mm/s max for walls, 80mm/s for infill