1 / 8
PBS-4 SUPPRESSOR (AIRSOFT)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Model is inspired by the PBS-4
- Rating
- 0 / 5
- Likes
- 7
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
3D model description
This Model is inspired by the PBS-4
Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders
New thread, 24mm x 1mm right
VFC Version 24mm x 1.5mm right
Dimensions:
- Length: 181mm
- Widest Diameter: 44.5mm
3D printing settings
My advice so you can get the best quality on this print on Cura 5.3.1
- Layer Height: 0.16mm
- At least 3 perimeter lines, Top and Bottom as well.
- Infill: 50% Cubic
-Horizontal expansion -0.1mm
- Hole Expansion: 0.2mm
- Print speed: 80mm/s max for walls, 80mm/s for infill