1 / 7
LED nozzle lighting for SOVOL ZERO/MAX/SV08
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LED nozzle lighting for SOVOL ZERO/MAX/SV08
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 65
- Makes
- 1
- Views
- 614
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Additional illumination for the print area. Mounted on the head in place of the additional fan for blowing air around the model (the ZERO lacks one).
Fastening with two M3x10 screws. The light source is an addressable RGBW LED WS2812B, on a 10mm diameter board.
SOVOL ZERO we connect to this connector
Add the code to the printer.cfg file
[neopixel nozzle]
pin: extruder_mcu:PC15
color_order: GRBW
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
initial_WHITE: 1.0