PLA Temp Tower - Prusa Core One / Core One + | Balanced / Speed / Structural (195°C - 235°C)

PLA Temperature Tower for Prusa Core One / Core One +

This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers.

It uses the "0.20mm Balanced / Speed / Structural" print profile as a base.

COMPATIBILITY WARNING: The included .bgcode file is generated specifically for the Core One series kinematics and speeds. Do not use this file on other printers (like MK4 or MK3S+).

REVERSE TEMPERATURE: This tower uses a Reverse Temperature progression. It starts COLD (195°C) at the bottom and increases heat up to HOT (235°C) at the top.

Specifications:

• Printer: Prusa Core One / Prusa Core One +

• Nozzle: HF0.4

• Material: PLA / PLA+

• Layer Height: 0.20 mm

• Profile: 0.20mm Balanced / Speed / Structural

• Infill: 15%

• Supports: None

Base Settings:

• First Layer: 230°C (ensures perfect bed adhesion)

• Base Layers: 225°C

Temperature Tower Range (Bottom to Top): The custom G-code automatically changes the temperature at each floor block:

• Floor 1 (Bottom): 195°C

• Floor 2: 200°C

• Floor 3: 205°C

• Floor 4: 210°C

• Floor 5: 215°C

• Floor 6: 220°C

• Floor 7: 225°C

• Floor 8: 230°C

• Floor 9 (Top): 235°C

Files Included:

.bgcode files: Ready to print on Core One / Core One +:

• Balanced

• Speed

• Structural

How to evaluate:

• Low Temp (Bottom): Check for underextrusion or weak layer bonding.

• High Temp (Top): Check for stringing, overheating, and loss of detail.