IKEA FÖRNUFTIG Housing for Particle and Gas Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print housing for the IKEA FÖRNUFTIG particle and gas filters
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My motivation for designing this model was to add filtration (partical and gas) to my DIY wooden enclosure/shelf of my printer. The existing housing on printables (at this time) didn't fit my needs. So I decided to model a new one for my needs using FreeCAD.
After a lot of thinking about problems & their solutions and modeling in FreeCAD, I finally got my first good-enough version of this model. The print itself went well and the assembly worked as intended.
Dimensions:
HEPA Filter aka Particle Filter: 250 x 390 x 20 mm
Active Carbon Filter aka Gas Filter: 233 x 371 x 15 mm
Fan: 140 x 140 x 27 mm (Arctic P14 Pro PST)
v1
Tolerance at sides used for the particle filter: 0.4 mm
Tolerance at sides used for the gas filter: 0.4 mm
Thickness: 1.6 mm
v2
Tolerance at sides used for the particle filter: 2.0 mm
Tolerance at height used for the particle filter: 0.6 mm
Tolerance at sides used for the gas filter: 2.0 mm
Tolerance at height used for the gas filter: 0.6 mm
Thickness: 1.6 mm