Rugged Box for Temu Blower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified rugged Box that fits inside a negative for a aelectric blower from Temu (link below) and its accessories
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
STP file with the whole assembly (including blower and accessories which where 3D scanned) is included for easy modifications.
The negatives parts (one in box body and the other in the lid) are independent pieces from the box (i thought if the blower brakes down, i could use the box for something else). The lower one (in the box body) has on the bottom a cutout for the charging cable)
Case has integrated handle and holes for magnets (5x2 mm), but in the end i didn't used them because the fitment was on point between the negatives and the case/lid. Case/lid has writing on it (Suflici) which somehow means blower in Romanian.
Hinges have bigger gap than original model to add M3 washers for easy rotation. I designed it with 3x 0.5 mm on each side, but in reality is hard to assemble them, so i opted for only 2 per hinge side.
I used PETG for all the printed components.
Link for the Temu blower:
