Repair Einhell table drill
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.37 – €0.45 net (excluding VAT)
For file: Booraanslag_05-Pen_0.2mm_PETG_MINI_29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 28.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Depth gauge broke off. An ‘one bolt’ solution.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This cheap table press had a plastic depth stop and gauge. It broke off.
The new printed ring has a slight opening (1 mm) and a slot to put the uptight gauge in. The exact height of the gauge can be adjusted by sliding it up or down before the bolt is tightened. I will probably reprint the gauge in a darker color for better contrast, but for now it works.
The model is parametric (FreeCad) so it can be adjusted for other drills.
Printed with PETG with various infill densities to strengthen the corners.