Floatwheel ADV charging port plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile Floatwheel ADV/Pro/ADV2 charging port plug.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Low profile Floatwheel ADV/Pro/ADV2 charging port plug.
Nails may be required :)
The sealing is made in a form of a thread, so just unscrew and pull it and it will go out.
Printing advice:
- TPU 95 HF
- 100% infill for a head of the plug
- No infill for a body of the plug below the head (body should be squishy)
- Variable layer height with prioritized Quality (0.08 Quality + 0.5 Smooth)
- Supports ARE required (TPU bridges ain't good)
- Increase gap between supports and model to 0.45mm(TPU is sticky)
- Arachne wall generator (it works better with fine features of the model)
See Also:
Floatwheel ADV/Pro/ADV2 fender and minifender (BTG)