1 / 2
John Deere 1910 Aircart Meter Roll Insert/Disc
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These parts are a replacement shaft insert and end disc for aircart meter rolls.
- Rating
- 0 / 5
- Likes
- 2
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Standard Digital File License
These parts were printed in nylon with 7 perimeters. (PETG may work but have not tested.) Tolerances are tight due to the nature of where the parts fit together, make sure your printer is dialed in!
Some supports are necessary and will be a little tough to remove, but it can be done with a sharp knife and chisel to peel them away.
1910 compatible Meter Rolls can be found here.
I am not liable for any misapplication due to poorly calibrated meters or poor quality prints. Print and use at your own risk.