Counting matching models…
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
If you experience issues with oil seeping through the spindle seals on your John Deere 110TLB, the issue may be pressure building as the oil warms up. This is especially problematic during winter when the tractor operates in freezing…
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
After some time designing and field testing, here we are! 02/24/2026 UPDATE: Added low rate yellow meter. I printed these in TPU 95A: 6 perimeters 30% Cubic infill Check “Avoid Crossing Perimeters” to ensure no stringing and a smooth…
Disclaimer: This is a part of a blog post I am currently writing up. I have not tested this yet but once I have, I will update this model to reflect this. I have created this three switch panel that enables 12V accessories to be attached…
an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)
🇫🇷 Présentation – Lampe John Deere Ajoutez une touche rustique et emblématique à votre intérieur avec cette lampe inspirée du célèbre logo John Deere. Le cerf bondissant, symbole de puissance et d’élégance, est mis en valeur dans un…
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
John Deere‑Inspired Decorative Lamp – 3D Printed This 3D‑printed lamp is inspired by the iconic style and colors associated with John Deere agricultural equipment. Designed as a tribute piece for fans of farming culture, tractors, and…
To make the 4020 1/64 scale, start by scaling it down to %12.5 (in mm) Here's a link to the 4020: 4020 Tractor
John Deere 48 Front Loader - 1:8th Scale Made to fit the 3020 and 4020 tractors I have modeled. Uses M2 and M4 Screws. Indents indicate where holes need to be drilled out. Would love to see pictures of your makes!
John Deere Rear Wheel Rims - 1:8th Scale Made to fit the Scale Models 1:8th scale tractor. Will also fit the 1:8th scale John Deere 4020 and 3020 models I have available. However, since the rims needed to accommodate the OEM tire, there…
John Deere Rear Wheel Rims - 1:8th Scale Will fit the 1:8th scale John Deere 4020 and 3020 models I have available. These can be used to replace the Scale Models 1:8th scale 4020, but the OEM tires may not fit properly. Files included in…
Mount to put behind 4640 screen in John Deere tractors. Installed by unscrewing 4 screens in the back of screen and sandwiching mount between JD bracket and screen. Have printed in 6 outerwalls and 35% infill. Works great.
I printed the latch with PETG. I printed it on its side to give the layer line orientation the greatest strength at 30% infill 6 perimeters. GCODE with those settings attached.
The Tires and Rims Are from Eli Conrad (pictures will be added soon)
There are two variants of the JX-75, early and late. This is a replacement propulsion drive pulley for the early series machine, JD part number AM107567. 3-1/2" outer diameter, 10mm shaft, 3mm key. (The newer version uses a 4" drive…
A very simple model of wheel for the mower unit for John Deere 415. After extended testing, I find that the model is not resistant to sharper stones, but durable enough to last one season. You may want to increase wall loops or add TPU on…
This is a front wheel replacement for the original Sabo Mowit 500f/John Deere Tango E5. I found the original too expensive for a wheel that wears out to quickly because of non existing ball bearings. This design contains 2 ball bearings…
made with freecad sorry i dont have a picure for it no one will use this. it is not all the way finished because the bolt that holds it does not fit so i need to refine it have a nice day
Print settings 100% infill 4 perimeters 0.05 first layer because of adhesion
Print settings 100% infill 2 perimeters 0.05 first layer because of adhesion
As the old starter switch finally broke, I designed a spare one. ++++Print details++++ designed for 0.15mm Layerheight support needed Photo 1 shows the pin where the switch fits onto, Photo 2 shows the original switch on the right and NOT…
You need battery and voltage indicator from ali https://pl.aliexpress.com/item/1005005967541646.html?spm=a2g0o.order_list.order_list_main.17.6b761c24lcUAuf&gatewayAdapt=glo2pol and some wires to connect to battery.
John Deere Cookie Cutter. Printed at 100% size but probably 125% is better. Print Settings Printer: Creality CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Category: Kitchen & Dining
I designed these covers as I have had to replace one or both of these idlers every single year. Snow packs up inside the pulleys during use and then melts. The melt runs straight into the bearings where it sits all summer long rusting up…
Print this with the holes on the build plate, using normal style supports and 25-50% gyroid infill. The supports should snap right off with minimal cleanup required. This is the same part I designed and was selling. JD M122280 585195…
I really liked Victor's design. It was too large for one of my applications so scaled it down a bit.
Pedal attachment for John Deere electric car, junior still has short legs and the seat was not moved forward enough. Nástavec pedálu do elektrického auta John Deere, junior má ještě krátké nohy a posun sedadla dopředu nestačil. Print in…
I created a double cup holder for John Deere and Massey Ferguson tractors and many others. A base is required to which the model will be screwed. Good luck! Print filament: PETG/ABS
John Deere hydraulic connector cover. Best printed in PETG or ABS, fits the original spring
For when the rubber on the gear stick handle degrades and breaks up, causing the original buttons to fall out. This was made for a JD 6930, but looks like they should fit other models including 6M and 6R series with the autoquad…
If you experience issues with oil seeping through the spindle seals on your John Deere 110TLB, the issue may be pressure building as the oil warms up. This is especially problematic during winter when the tractor operates in freezing…
John Deere 4020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
Ce peigne à roche est conçu spécifiquement pour l’excavatrice John Deere 26G . Idéal pour le tri des matériaux, il permet de tamiser la terre et de retenir les roches et autres débris plus volumineux. Modèle robuste et fonctionnel, prêt à…
Replaces the Cicarette Lighter / Ashtray on the right hand side.
Use 3 pcs normal 6.3mm Crimp Terminal (secured against slipping out). Used for John Deere tractors, power supply for external equipment. For the correct connection order of cables, you can see the cover in the machine or the operating…
add a modifier and 100% infill around bolt hole and latch side 90 degree handle pic is for reference but does not print well functionally
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
This is a John Deere light box clock. I used the shorter shafted one of the 2 from here https://www.amazon.com/dp/B09Q11KHBX?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 which is 9mm on the threads so I'm sure any other 56mm x 56mm x 15mm with…
John Deere - Suitcase Weights with Bracket - 1:8 Scale Designed to fit 1:8th scale John Deere tractors. Uses M4 Screws
John Deere Rear Wheel Weights - 1:8th Scale Uses M3 screws
John Deere Front Slab Weights - 1:8th Scale Designed to fit on 1:8th Scale John Deere tractors produced by Scale Models. Uses M2 Screws to attached to tractor. Holes will need to be drilled and tapped on tractor.
Replacement Pedal for a toy John Deere Pedal 8520 Tractor. Hardware: 2x M3 x 8mm bolts 2x M3 nuts
just a decorative sign of your favorite tractor manufacturer i used Prusa PETG Jungle Green and Pineapple Yellow If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
After some time designing and field testing, here we are! 02/24/2026 UPDATE: Added low rate yellow meter. I printed these in TPU 95A: 6 perimeters 30% Cubic infill Check “Avoid Crossing Perimeters” to ensure no stringing and a smooth…
John Deere 530 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.75in (6.4mm x 222mm) rod used for rear axle 4mm rod used for steering wheel (Used an M4 Screw…
Always wanted an John Deere clock for my shop. Pretty Expensive to buy so i designed this one. the main clock face is sandwiched between a front and rear ring. The rear ring has depth to allow for a clock mechanism(available on Amazon)…
A recreation of the air vent for John Deere 2140. In image the original is to the left and my design is to the right. Print these parts in whatever plastic you have that is more accepting of heat. All parts can be printed easy with only…
Our John Deere loader has shims for the bucket. I took measurements and designed new shims on FreeCad to replace the worn or missing shims. I printed these in ABS to see how they would fare with the sand I scoop. The original ones I…
John Deere 318 Lawn Tractor Steering Bushing. Made by measuring worn out bushing and recreating it. Your comments, are appreciated.
The right hand handle off of the John Deere digger ride on toy. If it is too big for your printer you can cut it with a dovetail.
The fuel tank cap for my John Deere 185 was cracked and I needed a replacement. I made this and it fits great. The cap should fit tanks with threads that are close to 2.45" to 2.5". Print with PETG as it won't break down when in contact…
Calidad: Altura de capa de 0.32 mm. Relleno: Densidad de relleno ajustable, de 20% a 40%. Material: Utilizar PLA. Velocidad: Impresión a velocidad variable, de 40 mm/s a 60 mm/s. Soportes: No son necesarios.
I lost one of the caps that cover the caster spindles on our Ztrak Z930M commercial mower. I had apparently injected an excessive amount of grease & that had pressurized the air under the cap. The pressure caused the cap to pop off while…
RollyToys John Deere 7930 Tretkurbelabdeckung für E-Umbau
Replacement part for John Deere mowers/tractors. Print in ASA as minimum. You can use my parametric to make your own: https://www.printables.com/model/1348321-parametric-flanged-bushing-sleeve
If you need a modified version then check here: https://www.printables.com/model/1348326-parametric-flanged-split-bushing-sleeve
The John Deere combine was maybe meant more as a model than toy. Well, it didn't hold up. Keep the fun going with some repair parts.
My John Deere 445 (54" Deck) spends most of it's life outside. The powerflow pulley collects water and dirt. I made this cap from TPU to keep it clean and dry. There is a ¾ NPT threaded hole on the center to allow for easy greasing of the…
Handy kann mit einem Quad Look am Lenkrad vom John Deere Aufsitzrasenmäher befestigt werden. Die Kappe vom Lenkrad wird dazu entfernt und die Halterung wird mit einer Schraube am Lenkrad befestigt.
Disclaimer: This is a part of a blog post I am currently writing up. I have not tested this yet but once I have, I will update this model to reflect this. I have created this three switch panel that enables 12V accessories to be attached…
an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)
I had a broken diffuser grille on my Claas 850 and I decided that I needed to replace it with something useful and made a phone mount. This mount has been tested on Claas 850 and John Deere 6130d tractors. the calculation itself was made…
Esta diseñado para extraer de forma facil el filtro de aceite del tractor de jardin marca John Deere, se realizo las medidas para el filtro con el numero de parte AM125424. filtro tipo usc-a Esta diseñado para que puedas utilizador un…
Tractor parts to replace John Deere part R98630. Note that the part includes a reinforcement with a #10 SAE washer so it is recommended that the .3MF be used which will pause the print when the washer is to be inserted. This design is…
I used this as an opportunity to learn solid modeling. All done directly in Prusa slicer. Rounded edges would be nice, but I kept it simple for now. Works great with my lawn sweeper, better than the original. The original was a T handle…
John Deere logo Print Settings Printer: Custom Rafts: No Supports: No Resolution: 0,25 Infill: 20 Filament: Filament PM PLA Category: Other
Backstory If you've seen my previous model , you'll know I picked up a snowblower for my lawn tractor to help with snow removal. Having only ever used my tractor for mowing, this would be the first time using it to clear the driveway. I…
This is a replacement chute handle part for a John Deere 44-inch snowblower (for X300, X304, X310, X320, X324, X340, X360, X500, X520 tractors). The John Deere part number is M90085. I suggest printing this in PETG with a brim.
1:8th Scale John Deere Heavy Cast Rear Wheel Rims
Un llavero tributo al legendario John Deere 6920 , uno de los tractores más fiables y queridos de la historia agrícola. Este modelo incluye la icónica silueta [o "el logo", elige según tu diseño] y el número de modelo claramente visible.…
K dispozici jsou 2 vykrajovátka na cukroví - s jelenem a bez jelena. Pokud chcete dělat cukroví jako na obrázku (linecké), udělejte jedno bez jelena, potřete ho marmeládou a přilepte k dílu s jelenem.
🇫🇷 Présentation – Lampe John Deere Ajoutez une touche rustique et emblématique à votre intérieur avec cette lampe inspirée du célèbre logo John Deere. Le cerf bondissant, symbole de puissance et d’élégance, est mis en valeur dans un…
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
John Deere‑Inspired Decorative Lamp – 3D Printed This 3D‑printed lamp is inspired by the iconic style and colors associated with John Deere agricultural equipment. Designed as a tribute piece for fans of farming culture, tractors, and…
To make the 4020 1/64 scale, start by scaling it down to %12.5 (in mm) Here's a link to the 4020: 4020 Tractor
These parts were printed in nylon with 7 perimeters. (PETG may work but have not tested.) Tolerances are tight due to the nature of where the parts fit together, make sure your printer is dialed in! Some supports are necessary and will be…
This is a button to help open the hood of a John Deere Compact tractor. Mine is a 2032R but it should work in all the others. It is pressure fit. You just push it in. So far it has held up well. I do recommend printing in ASA for long…
