Anti-Theft Wall Bracket for WiFi Video Doorbell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece outdoor mount with hidden screws and allen-key lock. Includes rain visor and speaker slots.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Anti-Theft Wall Bracket for WiFi Video Doorbell
A two-piece wall mount bracket designed to securely hold a WiFi video doorbell/intercom and prevent theft. The system is simple to install yet difficult to remove without the proper tools.
Compatible with: Botslab R810 wireless doorbell, or any wireless doorbell measuring 55mm wide × 160mm tall × 35mm deep.
How it works
The bracket splits into two halves. Piece A (bottom) is screwed directly to the wall — once the doorbell is inserted, the screw heads are completely hidden behind it. Piece B (top) slides down over Piece A, with collar tabs on each side that wrap around the outside of Piece A's walls. Four horizontal M4 allen screws lock the two pieces together. Without an allen key, the doorbell cannot be removed.
Features
Clean interior cavity — the doorbell slides in without any obstruction
Retaining lips on Piece B hold the doorbell in place once assembled
Collar/sleeve joining system — no external brackets or visible hardware
Small speaker grille slots on the bottom wall to let sound through
Integrated rain visor on top of Piece B, slightly angled to drain water away from the doorbell
Designed for outdoor use — print in PETG or ABS for best weather resistance
Dimensions (interior cavity)
Width: 60mm
Height: 172mm
Depth: 36mm
Designed for a doorbell measuring approximately 58 × 170 × 35mm, with 1mm clearance on each side for easy insertion.
Print settings
Material: PETG or ABS recommended (outdoor use)
Infill: 40% minimum
Perimeters/walls: 4+
Supports: not needed for Piece A — a few supports recommended for the visor overhang on Piece B
Orientation: flat back face down on the bed for both pieces
Hardware needed
4× M4 allen screws (horizontal, through the collar tabs)
4× M5 screws + wall anchors (to fix Piece A to the wall)