Anti-Theft Wall Bracket for WiFi Video Doorbell

Anti-Theft Wall Bracket for WiFi Video Doorbell

A two-piece wall mount bracket designed to securely hold a WiFi video doorbell/intercom and prevent theft. The system is simple to install yet difficult to remove without the proper tools.

Compatible with: Botslab R810 wireless doorbell, or any wireless doorbell measuring 55mm wide × 160mm tall × 35mm deep.

How it works

The bracket splits into two halves. Piece A (bottom) is screwed directly to the wall — once the doorbell is inserted, the screw heads are completely hidden behind it. Piece B (top) slides down over Piece A, with collar tabs on each side that wrap around the outside of Piece A's walls. Four horizontal M4 allen screws lock the two pieces together. Without an allen key, the doorbell cannot be removed.

Features

• Clean interior cavity — the doorbell slides in without any obstruction

• Retaining lips on Piece B hold the doorbell in place once assembled

• Collar/sleeve joining system — no external brackets or visible hardware

• Small speaker grille slots on the bottom wall to let sound through

• Integrated rain visor on top of Piece B, slightly angled to drain water away from the doorbell

• Designed for outdoor use — print in PETG or ABS for best weather resistance

Dimensions (interior cavity)

• Width: 60mm

• Height: 172mm

• Depth: 36mm

Designed for a doorbell measuring approximately 58 × 170 × 35mm, with 1mm clearance on each side for easy insertion.

Print settings

• Material: PETG or ABS recommended (outdoor use)

• Infill: 40% minimum

• Perimeters/walls: 4+

• Supports: not needed for Piece A — a few supports recommended for the visor overhang on Piece B

• Orientation: flat back face down on the bed for both pieces

Hardware needed

• 4× M4 allen screws (horizontal, through the collar tabs)

• 4× M5 screws + wall anchors (to fix Piece A to the wall)