0x2a's Fridge Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add a handle to your fridge.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adds one or more handles to your fridge.
I used two cut-to-size metal pipes from an no longer used ikea shower curtain setup to create the handles. Similar sized tubes should work too.
The two printed parts are placed below and above the pipe. Then they can be convinced to perfectly slide in place by carefully tapping the top part with a rubber mallet until the metal tube fully covers the circular extrusion and sits flush with the plastic. A small ident/notch prevents scraped material to be visible. The result is a surprisingly stiff grip with a nice finish.
Print settings:
PETG
0.4mm nozzle
0.2mm layer height
30% Infill
3 or more Perimeters
FreeCAD project files included. Feel free to adapt it to your fridge.