Makita piston replacement for cartridge gun DCG180
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.23 – €1.50 net (excluding VAT)
For file: Makita fugepistol poiston_0.3mm_PLA_MK3S_1h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.36 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 1.08 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Makita DCG180 piston NOT filled with sealant.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I made this Makita replacement piston for the DCG180 because I thought the original one was getting filled with sealant in all the corners. I used 100% infill and PTE.
I used an ear plug to close the holes so that no sealant would get in.