20mm Switch Housing - Cone shaped
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A round switch housing for your 20mm switch, made to be mounted on vertical surfaces. 4 4.5mm screws are all you need.
- Rating
- 0 / 5
- Likes
- 97
- Downloads
- 225
- Makes
- 0
- Views
- 1,107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
20mm ROUND SWITCH HOUSING
This housing is cilindrical and cone shaped with 4 screw holes on the sides with a diameter of 4.5mm.
I designed this housing to be easily printable and small enough to be mounted everywhere that is not too curve.
No need for support if you have a decent print profile.
It's dimensions are approximately 50mm x 70mm x 45mm, I printed mine at 0.15mm layer hight, 2 walls ad 20% infill with PETG for just 10g of filament.
To mount the switch: unplug it, let the cable pass through the back hole, plug them to the switch with the housing dangling on the cable and then just push the switch in the bigger hole to make it snap into place, then screw or bolt the housing to where you want it to serve you the best.
I have included the STEP file cuz i find it to be more detailed and a better quality generally compared to the stl.