1 / 5
Snap-On Spool Stopper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Internal diameter 30mm. Copy and paste in slicer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stops filament spool from sliding off of holder if at an angle to the printer.
f.3d file included so that if the clip is not quite big enough you can uses the "push/pull" command to stretch the outer face.
Printed on 0.2mm nozzle so may need filing or sanding if using 0.4+ as tolerance may not be enough for larger nozzle sizes.