Flashforge AD5X Filament Cutter – Scalpel Blade Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable replacement blade holder for the filament cutter on Flashforge Adventurer 5X (AD5X)
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 103
- Makes
- 0
- Views
- 1,017
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
🔪 Flashforge AD5X Filament Cutter – Scalpel Blade Holder (Adapted for printing)
A printable holder for standard flat scalpel blades – replaces the original filament cutter blade on Flashforge Adventurer 5X (AD5X).
This part allows you to use cheap, widely available scalpel blades instead of proprietary or hard‑to‑find original blades.
🪒 Blade Compatibility
Designed for standard flat scalpel blades with:
Width: 5.7 mm
Thickness: 0.4 mm
The blade must be cut down to 13-14 mm in length before installation.
You can easily adapt the model (STEP / F3D files included) to fit blades of other sizes.
🖨 Print Settings
Setting | Value |
|---|---|
Material | PETG, ABS, ASA (rigid filament) |
Infill | 100% |
Perimeters | 2 |
Layer height | 0.08 - 0.16 mm |
Supports | ❌ Not needed |
🔧 How to Use
Print the holder
Cut a scalpel blade to 13-14 mm length
Insert the blade into the holder – fit is intentionally tight, so no glue is needed.
Use pliers to push the blade all the way in.Install the assembly into the printer's cutter mechanism
Secure with the original screw
📌 Why This Model?
No more searching for OEM blades – use standard scalpel blades
Easy to replace – just swap the blade
Remix‑friendly – adapt it to any blade size
📦 Files Included
STL (ready to print)
STEP / F3D (for remixing)
📸 Video
❤ Feedback & Remixes
If you adapt the model for a different blade size – share your remix or leave a comment!