1 / 2
Flashforge AD5X Filament Cutter – Scalpel Blade Holder — zdjęcie 1
1 / 2

Flashforge AD5X Filament Cutter – Scalpel Blade Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A printable replacement blade holder for the filament cutter on Flashforge Adventurer 5X (AD5X)

Ocena
5 / 5
Polubienia
47
Pobrania
103
Wydruki
0
Wyświetlenia
1013
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

🔪 Flashforge AD5X Filament Cutter – Scalpel Blade Holder (Adapted for printing)

A printable holder for standard flat scalpel blades – replaces the original filament cutter blade on Flashforge Adventurer 5X (AD5X).

This part allows you to use cheap, widely available scalpel blades instead of proprietary or hard‑to‑find original blades.


🪒 Blade Compatibility

Designed for standard flat scalpel blades with:

  • Width: 5.7 mm

  • Thickness: 0.4 mm

The blade must be cut down to 13-14 mm in length before installation.

You can easily adapt the model (STEP / F3D files included) to fit blades of other sizes.


🖨 Print Settings

Setting

Value

Material

PETG, ABS, ASA (rigid filament)

Infill

100%

Perimeters

2

Layer height

0.08 - 0.16 mm

Supports

❌ Not needed


🔧 How to Use

  1. Print the holder

  2. Cut a scalpel blade to 13-14 mm length

  3. Insert the blade into the holder – fit is intentionally tight, so no glue is needed.
    Use pliers to push the blade all the way in.

  4. Install the assembly into the printer's cutter mechanism

  5. Secure with the original screw


📌 Why This Model?

  • No more searching for OEM blades – use standard scalpel blades

  • Easy to replace – just swap the blade

  • Remix‑friendly – adapt it to any blade size


📦 Files Included

  • STL (ready to print)

  • STEP / F3D (for remixing)


📸 Video


❤ Feedback & Remixes

If you adapt the model for a different blade size – share your remix or leave a comment!

Tagi