1 / 2
Harbor Breeze Meshtastic Solar Gear Mount and SMA Antenna
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a minor edit to May Márquez's gear mount to align it with SubBass100's V2 holsters and improved strength design.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 39
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Obviously print with something that will weather well outside (ex: PETG). I used organic supports and they worked well and were easy to remove.
May 2026
I added a 4" OD pipe mount. I used zip ties to attach mine, but I think it should work with a pipe clamp if you want it really secure. There is an OpenScad file so you can modify the pipe mount to fit different diameter pipes. it is a very simple design. I printed the pipe mount with no supports using 25% infill and PETG.