Volvo Front NON-VVT Cam Seal Drift - From Reference (9995719)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Measured 9995719 with calipers, this is the result. Should be within a few tenths of a millimeter.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I bought a NON-VVT seal drift to measure and sketch up. Here it is!
On eBay here if you can't print yourself.
I suggest printing with a high number of walls (4 or more? Go nuts, I did 4 for this one. On the VVT one I did 10 since it's one big bolt, this is three small bolts so less needed.) random seams, and high infill. A large number of walls will make a solid section around the bolt holes which are the parts that'll experience the most stress. May need to slightly clean out the small bolt holes, I'm reading slightly undersized on those vs the real part due to the random seams.
Random seams should also help to make the interior fit better without a seam misaligning it on the cam end.
Pictures are of the tool I measured and sketched up on the left, and the printed one on the right.