1 / 2
HGLRC Rekon 10 Pro V1 Capacitor Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Securely mount a large capacitor to the HGLRC Rekon 10 Pro frame.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I made this to mount the large capacitor that comes with the Jijie (DakeFPV) H743 stack with 70amp ESC in the HGLRC Rekon 10 Pro frame. There isn't much space in the frame for the capacitor, so a discrete mount was the best solution using wires ran under the ESC. It makes for a beefy, but dense setup on a rather small deck for a 10in build.
There's an additional hole for a M2 nut to mount a 900mhz antenna vertically.
This item should be printed in TPU for best usability.