Animatronic Endo 01 From Five Nights at Freddys
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A functional animatronic Endo 01 from Five Nights At Freddy's
- Rating
- 0 / 5
- Likes
- 11
- Makes
- 0
- Views
- 544
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Standard Digital File License
This is an animatronic head based off of Endo 01 from Five Nights at Freddy's. This is a fairly simple animatronic with 3 main movements. Each eye can move left and right, each eyelid can move up and down, and finally the jaw can move so you can have it sing any song! if you have any questions or concerns let me know! I should respond within 2-4 days.
Materials:
-4 Micro Servos
-1 MG 996R Servo
-3 Paper Clips
-Super/Hot Glue
-Spray Paint & Acrylic Paint
Screws:
-4 SG90 Screws (They Come With Micro Servos
-2 3.54mm Screws
UPDATE #1: The Main Head, Upper & Lower Jaws & Teeth Have Been Updated.
There Is An Instruction Video Linked Below, In The Video It Talks About Endo 02 But Everything I Say Can Be Applied To Endo 01
Also please note: None of my models are perfect so this is not the best thing ever. If any of the models do not work or function properly let me know and I will fix and update them as soon as possible.
I DO NOT OWN THE RIGHTS TO ANY FIVE NIGHTS AT FREDDYS CHARACTERS! ALL RIGHTS GO TO SCOTT CAWTHON.
Infill: 20%
Supports: Yes
Material (Optional): PLA
Slicer: Cura
Z-Hop Should Be Enabled