Spinner for bit ratchets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small spinner for C and E 6.3mm 1/4" bits.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I wanted to make my small bit ratchets easier to spin, so I designed a spinner to be added directly to the bits.
I mostly aimed it at the longer E type bits, but it should work with short bits too.
Back of the spinner has a cutout for the drive mechanism, I tested it with the Wera and Prestacycle ratchets. The fit is pretty tight, I used a vise to press it on. After installing the spinner for the first time it can be moved and removed by hand. You may scale the model if you prefer a looser fit.
Inspired by @DaveRome_169024's love for ratchet spinners.
Printed with 4 perimeters in PLA, 3 is probably plenty though.
0.2mm layer height