UART TTL Board Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an enclosure for a UART TTL board like this one…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is an enclosure for a UART TTL board like this one [https://www.aliexpress.com/item/32801557756.html?spm=a2g0s.9042311.0.0.dcd44c4d4fxiCi].
In addition to the 3D printing I went through the trouble of making little "light pipes" for the 3 LEDs on the board. I used the "thick" clear plastic from typical chocolate boxes (e.g. Ferrero Rocher and the likes). Sawed and sanded until it fits in the little square holes in the enclosure. Secured with a bit of crazy glue. Adds a nice touch but by no means necessary.
Note that for a result where you can actually read the pin labels, you need a 0.2mm nozzle.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
15% cubic
Filament: Overture PLA Grey
Notes:
Use a 0.2mm if you want to be able to read the pin labels. Some sanding required to clears the first layer or so. Seal the enclosure with some epoxy glue.
Category: Electronics