1 / 5
Boxcutter Using Included Bambu Blade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
This is a working box cutter using only one screw and a blade. Both are included with your printer
Assembly Guide:
Screw the blade into the side that is the thinnest and closest to the outside>Slide the part with the blade into the main body>Place the pin into the hole simultaneously.
I strongly suggest gluing the pin with Elmer's glue. Use very little and apply gently to the shaft and spin to spread, let sit for 15-30 minutes.