Parametric waterproof enclosure (no supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix to add additional screw pillars and optimization for large enclosures
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Set XAdditionalScrew to the number of additional screws along the X-side walls (0 = only the original 2 in the corners, 1 = one at the midpoint of the wall, 2 = two equally spaced on the wall)
Set YAdditionalScrew to the number of additional screws along the Y-side walls
Enable OptimizeAdditionalScrewPillars to remove material below the screw mount, instead gradually emerging from the side wall.
If OptimizeAdditionalScrewPillars is enabled, RemainingPillarHeight dictates how much of the pillar remains (starting from the top plane of the bottom of the enclosure)