Roomba Guard for Clothes Drying Racks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stopper/guard for clothes drying racks. It stops robot vacuum from getting caught on the rod.
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 227
- Makes
- 3
- Views
- 1,384
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I included 9 different design.
- 3 different rod diameters (16mm,18mm,20mm).
- 3 different gaps of the rod to the ground (0mm, 2,5mm, 5,5mm)
That depends what clearance your drying rack has to the ground.
- All designs are 200mm long.
The one shown in the pictures (Leifheit drying rack) is the one with 18mm diameter and a 5,5mm gap.
The print takes a few hour (10 for me) and around 95g of filament.
The print orientation as shown in one of the pictures is really important. If you print it lying down the layers are not that bendable and could break while snapping onto the rod.
I printed this with PLA (Creality PLA White)
If you have any suggestions let me know. Have fun.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3v2
Rafts:
No
Supports:
Yes
Resolution:
28mm
Infill:
25% Gyroid
Filament: Creality PLA PLA White
Notes:
Print with at least a 8mm brim.
Category: Household Supplies