Janet Jackson Control Bookmark (Hueforge)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Control Album
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 87.5x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.8mm
#000000 PLA Sunlu Meta Black Transmission Distance: 1
#989898 PLA Jayo Gray Transmission Distance: 1
#ffffff PLA+ Sunlu White Transmission Distance: 2.1
#ff0000 PLA Jayo Red Transmission Distance: 2.5
This print uses 4 unique filaments
Swap Instructions:
Start with Sunlu Meta Black
At layer #19 (0.96mm) swap to Jayo Gray
At layer #26 (1.24mm) swap to Sunlu White
At layer #36 (1.64mm) swap to Jayo Red for the rest.