Counting matching models…
Screw caps to make your H2D / H2S / H2C / P2S/X2D look more refined. PLA works the best and there are no issues when printing with high-temp materials. Please note that my main platform is MakerWorld, where you can find more of my work:…
Gridfinity 4x3x6U P2S toolbox w/ tray insert. This is a modified version of my A1/A1 Mini insert. I believe P2S and H2 series use same hotend, so this should work, except for the silicone sock which H2 Series is different. As for the…
🧹 Cleaning Tool for P2S A practical cleaning tool designed for Bambu Lab P2S (and compatible parts), created to make it easy to remove leftover filament, dust, and debris from hard-to-reach areas. The model is easy to print , durable, and…
This filtration kit was specially designed for the Bambu Lab P2S to effectively reduce fine particles and odors emitted during 3D printing, especially when using technical filaments (ABS, ASA, Nylon, PC, etc.). The concept remains simple…
This poop basket doesn’t extend beyond the printer’s overall dimensions, so the printer can be placed flush against the wall. Two m3 bolts (11-12mm) are needed to attach the base to the printer. The container then slips onto the base with…
Bambu Lab P2S Silicone Foot Mold / Vibration Dampener Mold This is a 3-part casting mold designed specifically for the Bambu Lab P2S 3D printer feet. Important Note Please note that my Bambu Lab P2S printer has not arrived yet , so this…
do not print the mk1 rotator.
le Bord ne fait que 3mm de largeur Imprimez dans le filament que vous voulez
xTool P2S Adapter for TwoTrees Honeycomb Bed (600x300mm) This custom-designed mount adapts a 600x300mm honeycomb panel to fit perfectly inside the xTool P2S laser cutter. The Problem and Solution When cutting materials like acrylic on the…
BAMBU P2S Ikea Platsa FAN 120 cooling system and temperature controller. We all know that the printer inside the cabinet is fine, but the temperature inside is high. We need a system to lower that temperature, and we can achieve this with…
Simple filrst layer for Bambu Lab A1 V2 P1P P1S P2S X1 X1C X1E and easy access with pull tab, choose the printer sheet.
Star Wars Bambu labs P2S door latches - may fit other bambus Please support me by following me
Bambu Lab P2S Stepper Motor Covers Left and right side. With Bambu Lab logo cutout.
Are you tired leaving your nails trying to remove the PTFE tube from your Bambulab 3D printer (and maybe others)? Give a try!
Remix for an amplifier case. Original one doesn't fit in several ways.
Print laying on the side with supports. Category: R/C Vehicles
Holder on the wall for switch HUAWEI S5731-L8P2HT-RUA with adapter. The print must be with supports.
This is a Stacking bracket for Werner1107's Arylic Up2Stream Amp v4 case . It is spaced to allow air-flow from the case top vents, with a thin lip to keep the cases stacked.
This case is intended to be used with the Arylic Up2Stream Pro V3 + V4 (Multiroom Audio Receiver Board). Cover and base are held together by four M3x16 hex-screws (self tapping, no threaded inserts required). The board is sitting in…
People have reported issues with their xTool P2/P2S where the accessories will no longer connect. Some have attributed the problem to a buildup of soot, particles, smoke, tar, etc. on the exposed pins of the accessory connector inside the…
This right angle adapter is designed to seamlessly fit a 100mm air hose onto your xTool P2S. Perfect for tight spaces. Print the adapter on the little box, for minimal supports and optimal direction of the layerlines. Also you'll need an…
I already had 6" exhaust tubing in place for my laser cutter before I upgraded to the xTool P2S, so I needed a coupler to transition the OEM tubing including with the laser cutter to ventilation I already had. This coupler did the job and…
This is a fixed height riser for the xTool P2/P2S. The model is designed as a tapered cylinder with a recess area at the top for the feet to be inset. The riser elevates the machine approximately 36mm for engraving cylinders with larger…
This part is very easy to lose due to aging. it is recommended to use flexible materials such as TPU， There are two versions, one with a snap and the other is just the cover itself.
Y-adapter for the xTool Inline Fan to connect an S1 or P2 or P2S and an F1 Ultra simultaneously, including a plug for sealing off one connection if only one device is used.
Remix of werner1107's case for the Up2Stream V4, with: Cut out for the power/status LED Cut out for IR receiver Revised mounting holes for either heat set inserts or self tapping M3 screws There are two files for the main body, with 2.8mm…
Case for Arylic Up2 Stream PRO and SPDIF input or output board LED's and IR reciever are visible trough meshed holes infront of the case, IR might have somewhat limited sensitivty, have not tried it out myself, but LED's are nicely…
This is a minimal bezel for a P2s. It is designed slightly loose to be easy to install and not damage the screen, if you wish adjust the size,+/- 0.5 mm in the slicer. You can add a touch of colour or just print in it charcoal. Enjoy!
Design Concept The P2S feet/risers are designed to elevate your device, ensuring improved airflow and stability. Uses Ideal for raising BAMBU P2S or other devices to promote better ventilation and to prevent overheating. Assembly…
Design Concept The P2S display bezel is designed to enhance the look and protection of your Bambu P2S 3D printer's display screen. The bezel design is sleek and allows easy access to the touchscreen functions while providing a…
Function The chute is used for collecting waste or material by-products from a machine, guiding them neatly into a bin or other container below. It helps manage clutter and keeps the workings of the machine clean and efficient. Assembly…
Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…
This is a more minimal version of my first minimal bezel. This does require you to detach the screen of the P2S. You will also need to detach the ribbon cable from the screen. Press the bezel on the back of the screen and then reattach…
This 3D printable logo set is inspired by the Bambu Lab P2S printer and includes three different versions : 1 Bambu Lab P2S – full logo version 2 P2S only – minimal style logo 3 Bambu Lab P2S (engraved 0.01 mm) – designed for multi-color…
I do not own an X1C, but it appears to use the same handle part as the P1S. Fits on the P2S as well, but you will see a message that the door is open unless if you disable the detection feature for it under the ‘safety’ settings.
🇬🇧 Poop Box and Slide Poop Box Dimensions: 196 × 190 × 80 mm Filament usage: PLA, 143 g Print time: 2 h 16 min Poop Slide Dimensions: 249 × 202 × 46 mm Filament usage: PLA, 56 g Print time: 1 h 6 min The slide mounts to the back of the…
Hello, Today I have for you the Bambulab P2S original tool box . It is absolutely great for storing the original tools that you get with the P2S. It fits absolutely great and the writing just clicks on, no glue needed. I used PLA/PETG as…
A simple knop for easier opening. Space for a 6x2mm magnet to ensure detection works.
Bambu Lab P2S Stepper Motor Covers Right & Left 1.0 Recommenders Filament ABS & PETG Thank ;-)
witam zaprojektowałem stojak na płytę do drukarki bambulab p1s, p2s oraz anycubic kobra 2 pro wszystkie stojaki do tej pory dostępne do testowania problemu z wycięciami na płycie, ciężko było trafieniem płytą na miejscu. W pomieszczeniu,…
As the standard spool holder for the Bambu Lab P2S is created for the same width as the AMS2 Pro (68mm, a 70mm spool barely fits), I went in search for a replacement. I didn't find one, so I tried to make one. And this is the result. The…
This is a compact purge bin designed to catch filament during extruder purges. It uses standard 5×2 mm magnets, which simply press-fit into place. While this model was designed for the P2S from bambu, it should attach to any printer with…
This spool holder uses the top piece of the original holder. To disassemble it, it is best to use this guide: https://wiki.bambulab.com/en/p2s/maintenance/replace-spool-holder The part is printed in place, requires no supports, and uses…
Screw caps to make your H2D / H2S / H2C / P2S/X2D look more refined. PLA works the best and there are no issues when printing with high-temp materials. Please note that my main platform is MakerWorld, where you can find more of my work:…
P2S Poop Bucket that gets connected with x2 18mm magnets. Should also work for P1S & X1C as they have the same poop chute. If anyone tries it let me know in the comments please as I only have a P2S. New Bigger 4 magnet Version: This works…
P2S Poop Bucket that gets connected with x4 18mm magnets. Should also work for P1S & X1C as they have the same poop chute. If anyone tries it let me know in the comments please as I only have a P2S. Holds a good amount more then the…
I couldn't find a case for the board so created this one. Comes in 3 parts, case, lid and changeable face plate. Although the face plate turned out to be back plate. Stream board:…
This plug enables Bambu Lab P2S chamber temperature to keep and rise quickly around 50-55 degree while printing engineering grade materials like ABS, ASA, Nylon etc. Besides, plug will reduce the odors of harmful filaments in your room…
Gridfinity 4x3x6U P2S toolbox w/ tray insert. This is a modified version of my A1/A1 Mini insert. I believe P2S and H2 series use same hotend, so this should work, except for the silicone sock which H2 Series is different. As for the…
Many P2S users, including me, have the problem that their PTFE tube, going away from the toolhead, is scraping on the glass lid. To solve this issue I made a clip that you can attach to the cable chain next to the ptfe tube. This helps to…
No replace. No screw. No glue. Just snap on the orig. handle
Created a few options for nozzle holders for these printers. Benefit of this design is that labels are visible.
Stackable housing for the Arylic UP2Stream V4. As I wanted to stack two of these devices on each other I made this housing. There is one upper half with and one without pocketholes. On the bottom of the foot there are small spaces for 6mm…
Bambu Lab LED Progress Bar (DIY version using Home Assistant + ESP32 + WLED) There’s a ready-to-use progress bar kit available from BIQU if you prefer something plug-and-play: BIQU Panda Status LED Light Bar Kit H2D-Style I wanted to…
Display Cover for Bambu Lab P2S / Touchscreen Protect your printer’s touchscreen with this custom-fit Display Cover —designed to guard against scratches, dust, fingerprints, and accidental impacts while keeping your setup looking sleek…
🧹 Cleaning Tool for P2S A practical cleaning tool designed for Bambu Lab P2S (and compatible parts), created to make it easy to remove leftover filament, dust, and debris from hard-to-reach areas. The model is easy to print , durable, and…
Print with a 0.4mm nozzle for a more accurate snap fit. Printing in PLA should be fine as the filament guide is not supposed to bear significant load. No AI was used to create this model
This is rugged case for accessories included with Bambulab P2S 3d printer with additional space for another parts. For latch I recommend to use PETG for better flexibility. You might print whole box with PETG as well. Fasteners required:…
Ring Binder Divider with Custom Nameplates Allows up to 12 dividers without overlap for A4 sized binders. I created this because I wanted to make a custom card binderwith dividers for my Daggerheart. Using rings I bought and some 9 card…
This filtration kit was specially designed for the Bambu Lab P2S to effectively reduce fine particles and odors emitted during 3D printing, especially when using technical filaments (ABS, ASA, Nylon, PC, etc.). The concept remains simple…
This poop basket doesn’t extend beyond the printer’s overall dimensions, so the printer can be placed flush against the wall. Two m3 bolts (11-12mm) are needed to attach the base to the printer. The container then slips onto the base with…
Bambu Lab P2S Silicone Foot Mold / Vibration Dampener Mold This is a 3-part casting mold designed specifically for the Bambu Lab P2S 3D printer feet. Important Note Please note that my Bambu Lab P2S printer has not arrived yet , so this…
do not print the mk1 rotator.
Gridfinity bin for nozzle wipers for P2S. Two versions: 1x1 for 4 items, or 1x2 for 8 items. Height for both is 3u, stackable. Wipers are quite close to each other, so sometimes may be hard to pull one, but you can choose by yourself:…
le Bord ne fait que 3mm de largeur Imprimez dans le filament que vous voulez
xTool P2S Adapter for TwoTrees Honeycomb Bed (600x300mm) This custom-designed mount adapts a 600x300mm honeycomb panel to fit perfectly inside the xTool P2S laser cutter. The Problem and Solution When cutting materials like acrylic on the…
Voila un support pour un baton de colle(diametre max 30mm) pour le plateau A réaliser dans le materiaux que vous voulez
BAMBU P2S Ikea Platsa FAN 120 cooling system and temperature controller. We all know that the printer inside the cabinet is fine, but the temperature inside is high. We need a system to lower that temperature, and we can achieve this with…
With this 100mm air duct adapter you can connect your Bambu Lab P2S to your custom ventilation system or connect it to an air filter. The adapter is mounted to the P2s' back-plate with six M4x8 bolts , washers are advised but optional.…
Removable P2S coil holder for narrow cabinets External P2S coil holder up to 75 mm wide, removable, compatible with Bambu P2s. We have included a new coil holder with a direct PS2 connection on the left side (the right side needs to be…
P2S Slim Poop Chute. I chose to design this as all the other available options were either too wide to use with the new external exhaust or required a surface below for it to stand on (e.g. a table) but my shelves are only just deep…
Simple filrst layer for Bambu Lab A1 V2 P1P P1S P2S X1 X1C X1E and easy access with pull tab, choose the printer sheet.
Star Wars Bambu labs P2S door latches - may fit other bambus Please support me by following me
This is a lower profile Chamber Exhaust Fan than the official Bambu “ P2S Chamber Exhaust Fan Kit ”. It uses the same $20 Bambu P2S chamber exhaust fan kit parts . Though design may appear similar to the Original Bambu Chamber Exhaust Fan…
Bambu Lab P2S Stepper Motor Covers Left and right side. With Bambu Lab logo cutout.
Möglichkeit, bei Bedarf schnell kleine Mengen an Filament zu wechseln und zu drucken. 4 Spulen können bereitgehalten werden. Praktisch für kleine Mengen, Farbwechsel, Beschriftungen usw. Jetzt auch für Bambulab P2S (auch bei Aufsätzen für…
Are you tired leaving your nails trying to remove the PTFE tube from your Bambulab 3D printer (and maybe others)? Give a try!
this is a simple air vent diffuser should clip into the p2s air vent, but please contact me if there are any issues(new to fusion so any feedback would be great :) MAKE SURE TO PRINT IN PETG-this is mainly due to petg having a good heat…
This is a positioning guide for the RA3 rotary and Xtool P2S. If you have, like me, a RA3 rotary tool for the F2/F1 and bought afterwards a P2S, you may figure out, that the positioning guide is only part of the separate RA3 for P2/P2S…
two version handle for default magnet and round 10x3mm based on very good design with deep refactoring https://www.printables.com/model/300087-bambu-lab-x1-door-handle
This is a Toolbox for your P2S items, and including a slot for screws, and also assuming that you already made your own bambu lab scraper
Works for P1P(with side panels), P1S, and P2S. No supports needed
THESE DO NOT WORK WITH THE STANDARD BAMBU P2S EXHAUST. THESE ONLY WORK WITH THE MODELS SHOWN BELOW. These are 2.5" magnetically attached ducts which work with the following models: Low Profile P2S Chamber Exhaust Fan Kit ver1.0 Bambu P1S…
Replacement screen mount clip for Bambu Lab P2S. My original tabs broke during transport, so I made this part to hold the screen in place again. Simple and works fine on my printer.
Mitutoyo Digimatic Micrometer insert for Bambu P2S Tool Box
Printing with materials with high shrinkage is challenging. Even if you've managed to control the plastic's adhesion to the plate, it doesn't mean the print will go smoothly. Large parts firmly glued to the bed can pull the plate away…
Open in PrusaSlicer or BambuStudio. Make sure to import all gcode changes from the 3mf file. All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C, X1E, A1 & A1 mini Temperature towers BambuLab P2S, X2D, H2S, H2D, H2D Pro, H2C…
Build plate holder model. It can hold five plates. The build plate holder fits X1, X1C, X1E, P1S, P2S, P1P A1 printers, and all 256x256 plate printers. I recommend printing with PETG and PLA supports. Check out my other models. model…
This was inspired/remixed from Jhead's case. I didn't like having a screw in the front and the board screw holes were a bit off of center. I reinforced the front wall and labeled the audio ports and power (I could never remember which was…
So this isn't entirely original work, because the inspiration for this was taken from ShaveStash at the following: https://www.etsy.com/listing/182665300/shave-stash-custom-travel-case-for-a-de I did, however, CAD it from the ground up,…
This is a simple enclosure for a DIY 2.1 speaker amplifier board. The enclosure houses a power supply and uses external panel-mount jacks for a consistent and more rugged look. The enclosure can be used standalone but was meant to pair…
Based on Arylic Up2Stream Pro v3 Enclosure with Lid by Corduroy_Pantaloons. Changes: added pegs in to allow for the board to go in without needing screws. Removed the slit on the side making for a simple look with intention of the antenna…
13.02.2024 - Update: I added another magnet cap file for magnets with 10mm diameter that " Robert Hidasi " created and kindly provided to download. 23.09.2023 - Update: I added the magnet cap file that fireant designed and kindly sent to…
I have mounted this to the wall, but you can also just use it sitting on a surface. I have included a gcode file using my .03mm “stupid fast” profile using PETG.
![[NEW MODEL IN PROGRESS] aca hurricane for bambu lab p1s,a1,p2s,x1carbon,p1x.](https://media.printables.com/media/prints/55883b49-4d4a-468d-a4a6-6d6f6183a293/images/11966674_69c73a7e-5c14-4dd2-9835-69644495fba5_4653c231-e623-4181-b439-b9ea06d951a2/chatgpt-image-dec-21-2025-08_54_53-pm.png)
