xTool P2/P2S Exhaust Tube/Duct Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a coupler to transition from the exhaust tube included with the xTool P2/P2S exhaust tubing to a 6" exhaust tube
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 74
- Makes
- 0
- Views
- 824
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I already had 6" exhaust tubing in place for my laser cutter before I upgraded to the xTool P2S, so I needed a coupler to transition the OEM tubing including with the laser cutter to ventilation I already had.
This coupler did the job and I just used zip ties to secure the ducting to it.
Printed with PLA at 0.2mm, the large diameter down on the plate, no supports, 4 wall loops (ends up being 100% infill that way but quicker print than 2 walls 100% infill). Also printed in “sport” mode on Bambu X1C.