xTool P2/P2S Exhaust Tube/Duct Coupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a coupler to transition from the exhaust tube included with the xTool P2/P2S exhaust tubing to a 6" exhaust tube
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 824
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I already had 6" exhaust tubing in place for my laser cutter before I upgraded to the xTool P2S, so I needed a coupler to transition the OEM tubing including with the laser cutter to ventilation I already had.
This coupler did the job and I just used zip ties to secure the ducting to it.
Printed with PLA at 0.2mm, the large diameter down on the plate, no supports, 4 wall loops (ends up being 100% infill that way but quicker print than 2 walls 100% infill). Also printed in “sport” mode on Bambu X1C.