1 / 2
VICE Hex Driver Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Totally overkill for a few hex drivers
- Rating
- 3 / 5
- Likes
- 8
- Downloads
- 27
- Makes
- 1
- Views
- 140
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Uses 6x3 magnets to retain the drivers and includes a small bolt organiser in the case lid. Inserts should press fit into the case, but may require a bit of super glue if they are loose, or shrinkage compensation if printed in ABS or similar and fit is too tight. I recommend stronger magnets (N52) for best results, but can get away with weaker ones.
Hardware | Quantity |
|---|---|
6x3mm Magnet (stronger the better) | 4 |
M3x30 BHCS or SHCS | 6 |
Filament in Photos
Bambu PLA Sparkle - Onyx
Bambu PLA Basic - Turquoise