1 / 2
Mazda Miata NB Cigarette Lighter – Haltech 12-Position Rotary Switch Mount — image 1
1 / 2

Mazda Miata NB Cigarette Lighter – Haltech 12-Position Rotary Switch Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a cigarette lighter replacement panel for the NB Mazda Miata (1999–2005) designed to mount a Haltech 12-position

Rating
0 / 5
Likes
3
Downloads
17
Makes
0
Views
208
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Open Community License v1

This is a cigarette lighter replacement panel for the NB Mazda Miata (1999–2005) designed to mount a Haltech 12-position rotary switch.

I removed the factory cigarette lighter and replaced it with a Haltech rotary switch used for ECU map switching and driver controls. This part fills the factory lighter hole and provides a clean, secure mount for the switch.

The design includes:

  • A flush cosmetic face that matches the interior trim

  • A rear anti-rotation tab so the part locks into the factory lighter housing

  • A tight switch mounting bore so the rotary switch does not rotate during use

  • Designed specifically around the Haltech 12-position rotary switch dimensions

Once installed it looks OEM+ and motorsport-inspired, perfect for track or Haltech-equipped builds.

I designed this as part of my Haltech Elite ECU Miata project.


Installation

  1. Remove the OEM Tombstone from the car

  2. Remove the factory cigarette lighter from the center console.

  3. Insert this panel into the factory opening.

  4. Install the Haltech rotary switch through the center bore.

  5. Secure with the switch retaining nut from the rear.

The anti-rotation tab prevents the panel from spinning when adjusting the switch.


Print Settings

Recommended settings:

  • Layer height: 0.12–0.20 mm

  • Walls: 3–4

  • Infill: 20–30%

  • Supports: None

  • Print orientation: front face down

Material suggestions:

  • ASA - My Choice for any car part 

  • ABS

  • PETG 


Compatibility

Vehicle:

  • 1999–2005 Mazda Miata (NB1 / NB2)

Switch:

  • Haltech 12-Position Rotary Switch - HT-010504

Other motorsport rotary switches with similar mounting dimensions may also fit.

Tags