1 / 2
Mazda Miata NB Cigarette Lighter – Haltech 12-Position Rotary Switch Mount — zdjęcie 1
1 / 2

Mazda Miata NB Cigarette Lighter – Haltech 12-Position Rotary Switch Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a cigarette lighter replacement panel for the NB Mazda Miata (1999–2005) designed to mount a Haltech 12-position

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Open Community License v1

This is a cigarette lighter replacement panel for the NB Mazda Miata (1999–2005) designed to mount a Haltech 12-position rotary switch.

I removed the factory cigarette lighter and replaced it with a Haltech rotary switch used for ECU map switching and driver controls. This part fills the factory lighter hole and provides a clean, secure mount for the switch.

The design includes:

  • A flush cosmetic face that matches the interior trim

  • A rear anti-rotation tab so the part locks into the factory lighter housing

  • A tight switch mounting bore so the rotary switch does not rotate during use

  • Designed specifically around the Haltech 12-position rotary switch dimensions

Once installed it looks OEM+ and motorsport-inspired, perfect for track or Haltech-equipped builds.

I designed this as part of my Haltech Elite ECU Miata project.


Installation

  1. Remove the OEM Tombstone from the car

  2. Remove the factory cigarette lighter from the center console.

  3. Insert this panel into the factory opening.

  4. Install the Haltech rotary switch through the center bore.

  5. Secure with the switch retaining nut from the rear.

The anti-rotation tab prevents the panel from spinning when adjusting the switch.


Print Settings

Recommended settings:

  • Layer height: 0.12–0.20 mm

  • Walls: 3–4

  • Infill: 20–30%

  • Supports: None

  • Print orientation: front face down

Material suggestions:

  • ASA - My Choice for any car part 

  • ABS

  • PETG 


Compatibility

Vehicle:

  • 1999–2005 Mazda Miata (NB1 / NB2)

Switch:

  • Haltech 12-Position Rotary Switch - HT-010504

Other motorsport rotary switches with similar mounting dimensions may also fit.

Tagi