1 / 3
28.6mm Carbon Steerer Tube Cutting Guide Jig – 3D Printable Saw Guide for 1 1/8" Forks — image 1
1 / 3

28.6mm Carbon Steerer Tube Cutting Guide Jig – 3D Printable Saw Guide for 1 1/8" Forks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple guide to cut carbon forks 3D printable cutting guide for 28.6 mm (1 1/8") carbon steerer tubes.

Rating
5 / 5
Likes
5
Downloads
64
Makes
0
Views
209
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Carbon Steerer Tube Cutting Guide (28.6 mm)

This simple 3D printable guide helps you cut 28.6 mm carbon steerer tubes straight and accurately. It aligns your saw blade and keeps the cut square, which is especially helpful when shortening carbon forks.

How it works

The guide consists of two compliant clamps, each tightened with a single bolt. The clamps are mounted on the steerer tube and act as a guide for the saw blade.

To set the correct spacing between the two clamps, simply place a credit card between them while tightening the bolts. This creates a precise slot that guides the saw blade and helps ensure a clean, straight cut.

Hardware

The model is designed to use M5 × 30 mm or M5 × 35 mm bolts, which are commonly used for flat mount disc brake calipers. This makes it easy to reuse bolts you may already have in your workshop.

Printing

  • Print two clamps

  • No supports required

  • PLA or PETG recommended

  • 3–4 perimeters recommended for strength

Versions

Two versions of the model are included to account for printer tolerances and different preferences:

  • 5 mm bore – for direct use with standard M5 bolts

  • 4.8 mm bore – for a tighter fit or if you prefer to tap the threads

Reusability

The guide is technically reusable, but it is primarily intended as a simple, low-cost tool for occasional or single use. If it gets worn or damaged by the saw blade, simply print another one.

Compatibility

  • Designed for 28.6 mm steerer tubes (standard 1 1/8")

Tags