34 models
I got a Wahoo Elemnt Bolt to replace an old and quirky Garmin Edge 500, and discovered that although the mount looks like a Garmin mount, it's rotated 90 degrees. I had been using Bryce's Garmin stem mount and he was nice enough to rotate…
Cutting guide for your bicycle fork's steerer tube. Inside diameter is 29.1 mm, and the thickness of the blade slot is 2 mm. This should work with most common ceramic/carbon cutting blades. There's a small insert that can be used to…
Inserts into the bottom of tapered steerer tubes to discretely and securely hide an airtag on your mountain bike. Does not work with straight steerer tubes, there is not enough room for an airtag in there! For use examples, look for…
Saw Guide or Cut Guide collars for cutting bike steerer tubes down to size. Designed for Metal Steerer Tubes. Slightly undersized to ensure a tight fit on the steerer. Carbon Steerer Warning: Clamping anything on a carbon steerer tube…
Simple snug fitting plug for the bottom of a steerer tube of RockShox Lyrik 2021 fork
Update 18 Nov 2019: I've got a Trek MTB which has their Knock Block which uses keyed spacers - I've modified the design to be compatible with Knock Block and uploaded that STL, and also added my Fusion 360 source file. A mount for the…
Simple and lightweight plug. The finger cutouts proved useless, so I offer two versions: with them (Type1) and without (Type2). Recommended Print Settings: Material: TPU Layer height: 0.2mm Walls: 2 Infill: 15% Top/Bottom shell: 4
This invention offers an innovative and discreet storage solution for mountain bikers, utilizing the hollow space within a bicycle's fork steerer tube to keep essential items hidden and protected. It is compatible with any fork steerer…
plug for use with rockshox zeb 160mm travel 38mm plungers fits with pushfit and can hold airtag
Summary Not all forks support the OneUp EDC. Some have ovalized steerer tubes or a minor internal diameter that's just too small for the full storage container. This adds back the storage container with 2mm shaved off the diameter. It…
Inspired by Dave Rome's tool from this escape collective article, but this tool allows you to thread extensions on for short printers or long head tubes. This tool is used to hold the stem and any bearings, spacers, or other pieces in…
Threadless Saw Guide for Steerer Forks This 3D-printable tool is designed to assist in shortening bicycle steerer tubes—whether steel, aluminum, or carbon —inspired by professional cutting guides like the Park Tool SG-6. It provides an…
this is a remix to make the plug fit a 32mm steerer tube
An adapter to replace the plug that comes with the OneUp Components EDC Threaded Top Cap . Designed to be used with the Bike - Mountain Bike Fork AirTag Holder (TPU) . Recommended Print Settings TPU 95A .15mm layer height NO supports…
Hello! UPDATE 1 - 16.7.25 → I've replaced the carbon shim for a new version with only 1.8mm width compatible with a parktool carbon saw blade. I've drawn up a saw guide to shorten the carbon/steel/aluminium steerer tube of your bike!…
Carbon Steerer Tube Cutting Guide (28.6 mm) This simple 3D printable guide helps you cut 28.6 mm carbon steerer tubes straight and accurately. It aligns your saw blade and keeps the cut square, which is especially helpful when shortening…
The Tube Top Plug Cab broke from my Cannondale Lefty, so I decided to print instead of rebuying it. I printed it in PLA within 0.1 mm with a Core One for the smoothest experience. PETG works also. Also, I reused the existing O ring; no…
I keep the 28.6mm (1 1/8") steerer tube from an old fork handy for when I'm pulling the fork from a bike for maintenance. This allows me to push in the old steerer as I remove the fork which will hold the stem and headset parts in place.…
Sits in an EDC V1 steer tube with a OneUp top cap. Has a recess for an o-ring. Prints upside down with no supports.
Motivation I wanted to run a bunch of accessories on my handlebars, so I needed to move the computer mount which originally spanned across the stem. Solution Uses the original hardware, which were button head screws. 2023-10-11 Lost the…
Redukce pro naražení do sloupku vidlice 1.8" Tapered, aby bylo možné použít originální spodní díl od One UP EDC Tool. Fork post impact reduction 1.8" Tapered to allow the use of the original One UP EDC Tool lower part.
Made for a 0.965" internal diameter steering tube.* A discreet way to hold an Apple Airtag with speaker (1.26" o.d.). The Airtag assembly fits snugly in the recess and the lid is made to hinge and secure shut with a small screw. I used a…
Couldn't find one for bicycle forks, so made one. You can use this to clamp the fork with a vice or a clamp. Print two.
This is aluminium steerer insert for carbon forks. It can be used for repair of lightly damaged fork steerer or increasing safety on a new fork. Do not even think about using it printed, even from PEEK. You have to have it machined. I do…
Replacing a well nut for M5 screw in straight 1 1/8'' tube for a tapered tube lower diameter 1 1/2''. Drop in replacement for tube with inner diameter of about 33mm. I added a piece of old tire tube for better grip
Support surface for steerer tubes (1 inch, 1 1/8 inch) on a self-made fork fixture. Contact me for more info on the fixture.
I printed in silk PLA for testing, but you should stick to engineering worth filaments if you want to use this with proper torque. I printed with adaptive layer height to help keep the curved top smooth. Also used slim trees for the fewer…
This 3D-printable adapter lets you mount a bicycle bell directly to the top cap of your bike’s steerer tube, keeping your handlebars clean and clutter-free. Designed for bells that use a 5 mm mounting screw, it replaces bulky handlebar…
A bicycle steerer tube cap designed to fit standard headset diameters. Several designs available.A bicycle steerer tube cap designed to fit standard headset diameters. Several designs available. When printing, I recommend organic supports…
Replacing a well nut for M5 screw in straight 1 1/8'' tube for a tapered tube lower diameter 1 1/2''. Drop in replacement for tube with inner diameter of about 33mm. I added a piece of old tire tube for better grip
Here is my simple every-day-carry container for 22mm ID steerer tubes. Good for hiding small bits and pieces. The main compartment is just a straight tube so you aren't limited by the restrictive design of expensive EDC steerer tube kits.…
There are three heights for the spacer - 16mm, 21mm, 26mm, measured from the two flat contact surfaces. I've only printed the 21mm. If you notice any flaws let me know and I'll try to fix it. The shape and height of the shielding cone may…
This is a 1-¼" headset spacer designed to sit on top of a stem. The interior is designed to fit the top cap of a Pro Gap Cap 1-¼" expander plug, but it will work with most top caps for 1-¼" headsets. In my particular case I needed a…
The Park CRS-1 is a great tool, but only works on 1" and 1-1/8" tapered steerer tubes. This print will allow you to dig the CRS-1 out of the bottom of your toolbox for use on tapered steerers. Fits over common tapers on Fox and Rock Shox…
