1 / 4
Screw on lid for Ikea 365 Drybox dessicant box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I got fed up of spilling silica gel everywhere, so I modified the lid to for heatset inserts and retaining screws.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 6
- Makes
- 1
- Views
- 100
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Requires:
2x voron style M3 5mm dia 4mm long heatset inserts
2x m3 x 8mm screws, head style isn't too important, BHCS or SHCS work well. Don't use countersunk screws.
There is a drilling guide so you don't have to reprint the boxes, just drill with a 3.2mm bit.
I printed these with cheap changeover PETG and you can see where I had a runout and swapped to an entitrely different colour. They should work in PLA as well, not tried in ABS/ASA.