1 / 4
Screw on lid for Ikea 365 Drybox dessicant box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got fed up of spilling silica gel everywhere, so I modified the lid to for heatset inserts and retaining screws.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 101
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Requires:
2x voron style M3 5mm dia 4mm long heatset inserts
2x m3 x 8mm screws, head style isn't too important, BHCS or SHCS work well. Don't use countersunk screws.
There is a drilling guide so you don't have to reprint the boxes, just drill with a 3.2mm bit.
I printed these with cheap changeover PETG and you can see where I had a runout and swapped to an entitrely different colour. They should work in PLA as well, not tried in ABS/ASA.