Search results: 365

Counting matching models…

Printables

IKEA 365+ Filament Dry Box & Spool Holder (improved supports and air circulation)

the missing files can be found in the original model

Printables

Strainer for Ikea 365+ rectangular food container

This strainer sits around 1cm above the bottom of the Ikea 365+ rectangular stainless steel food container (205.803.19). I use these containers next to my pizza oven for my topppings, and use the strainer for the one with diced…

Order a print of this model

Printables

IKEA 365+ 10.6l Wall Mounts

IKEA 365+ 10.6l Wall Mounts - 16mm Pipe for more strengh

Order a print of this model

Printables

Rangement dés et stylo pour le jeu "Le Donjon 365 Aventure"

Permet de ranger les 5 dés et le stylo (la version sur la photo est un premier a eu un problème d'impression et le crochet qui s'accroche sur la reliure n'est pas présent). Filament PLA Pearl RED de chez PRUSA. Le blanc, c'est de la pâte…

Order a print of this model

Printables

ORGANIZZATORE GT365

ORGANIZZATORE GT365 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS

Order a print of this model

Printables

Ikea 365+ LID Holder - longer lid

Lid holder for 21cm lid for IKEA 365+ Good for storing upto 5 lids.

Order a print of this model

Printables

IKEA 365+ Lid Holder

Sick of these lids flying around inside the drawer I created these stack cages. The height fit inside the drawers for IKEA IVAR.

Order a print of this model

Printables

Square Lid Organizer for IKEA 365+ – Holds 4 Lids!

Lost lids driving you mad? This organizer stores up to 4 square IKEA 365+ lids (15×15 cm) neatly inside cabinet doors or on walls. Never hunt for matching lids again! 🔧 Smart Lid Management: Designed specifically for IKEA's square storage…

Order a print of this model

Printables

Alternative Spool Hub for GMagican's Drybox IKEA 365+ 10.6l Spoolholder

Alternative spool hub that to be used with 608 bearings on GMagican's Drybox IKEA 365+ 10.6l Spoolholder with spacers

Order a print of this model

Printables

Alternative Silica Gel Container for GMagican's Drybox IKEA 365+ 10.6l

For my hygrometer to fit in the silica gel container I had to extend the slot to 46x27mm.

Order a print of this model

Printables

IKEA 365+ 10,8L storage and drying solution

Here is one more solution for filament drying and storage based on the IKEA 365+ 10,6 liters box. It consists of 4 parts. The spool holder, the desicannt box, the spacers and the gauge holder. The box holds up to approx 250gr of silica…

Order a print of this model

Printables

NIX63652 - RC10 Hex Conversion Hub

Hex Wheel Conversion Hub for RC10, NIX91 or NIX10M. One extra camberlink hole inside original. Uses bearing pack ASC3977 (3/16 x 3/8") + ASC7933 (spacer) + ASC7935 (.187x.50x.196") . Same as B4.1FT, SC10.2, B44.1. Uses B44 rear CVA bone…

Order a print of this model

Printables

Wall Square Lid Organizer for IKEA 365+ - Remix 8 & 12 Lids

Extended the model in Tinkercad, and added a flat section on the back to allow for people to use double sided tape, and not screws to not damage cabinets. Currently printing models...

Order a print of this model

Printables

USSR Triplet 365mm F3.65 lens rehouse

USSR Triplet 365mm F3.65 lens rehouse Add aperture & softfocus tunning

Order a print of this model

Printables

NIX63651 - Rear Hub for RC10

Similar hub as ASC6365 or ASC7364 but uses big outer bearing. One extra camberlink hole inside original. Uses bearing pack ASC3977 (3/16 x 3/8") + ASC7933 (spacer) + ASC7935 (.187x.50x.196"). Same as B4.1FT, SC10.2, B44.1.

Order a print of this model

Printables

Ikea 365+ Lid Holders for cabinet doors or walls

Summary: Ikea 365+ Lid Holder mountable on vertical surfaces, like cabinet doors, cabinet walls or walls in general. It includes complete holders for following Ikea 365+ container lids in variants for 4, 3, 2 or 1 lid: IKEA 365+ Lid,…

Order a print of this model

Printables

Drybox Ikea 365+ 10.6l & autorewind (and not) spoolholder (rewinder section)

This is the rewinder part of the project published here: https://www.printables.com/model/192366-drybox-ikea-365-106l-autorewind-and-not-spoolholde to assemble it please look at source project

Order a print of this model

Printables

Mount for a DARKBEAM 365nm UV Flashlight

A mount for a DARKBEAM 365nm UV Flashlight A hole is provided for a 1/4"-20 Threaded Insert to mount to a tripod. The insert is made for Wood Furniture and is not heat-set. The flashlight can be found at: https://a.co/d/06NMczS0 The…

Order a print of this model

Printables

Screw on lid for Ikea 365 Drybox dessicant box

Requires: 2x voron style M3 5mm dia 4mm long heatset inserts 2x m3 x 8mm screws, head style isn't too important, BHCS or SHCS work well. Don't use countersunk screws. There is a drilling guide so you don't have to reprint the boxes, just…

Order a print of this model

Printables

Ikea 365 pan sleeve

Stop burning your hands on the hot handle of ikea 365 pans.

Order a print of this model

Printables

Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.)

I had a collection of no brand silicone and glass containers with plastic lids like in IKEA 365+ containers and wanted to print one of the existing hanger models. I couldn't find much on printables but found some good examples on…

Order a print of this model

Printables

Plunger knob/handle for IKEA 365+ coffee/tea maker cafetière

The original wooden knob for my cafetière had loosened up over time, before it started falling off completely (usually into my coffee … ) I modelled and printed this as a replacement. The stem of the plunger has no thread, it's just a…

Order a print of this model

Printables

167mm Rod for 608ZZ bearings needed for IKEA 365+ Drybox

These are 3d printed rods for replacing the M8 threaded rods needed for this IKEA drybox model: It prints alright vertically in a core-xy printer - even though it already flexes around on top. Use a brim for adhesion. Bed slingers…

Order a print of this model

Printables

Shelf Hanger for IKEA 365+ food containers

Shelf Hanger for IKEA 365+ food containers Ikea. used to sell metal hangers as pictured but I can't find them so I made a solution. These should fit any 365+ food containers

Order a print of this model

Printables

IKEA 365+ 10,2 Liter Filamentroller 2026 und Trockenbox (Drybox) - (D/UK/F/CZ/ESP)

Diese neue Version 2026 habe ich im Laufe der letzten Jahre weiter verfeinert und optimiert. Hier stelle ich nun euch die neuste Version vor, um einen besseren Gebrauch zu erreichen. Die Prusament 2 kg Welle kann auch für breitere…

Order a print of this model

Printables

SCHÜCO 253655 + pin

SCHÜCO 253655 with the corresponding pin for the door. Full kit The model is a bit simplified for easier printing and install. Should be even stronger, print with PET-G as minimum, 3 walls minimum, 30% infill Print the pin with support as…

Order a print of this model

Printables

ThermoPro TP157 stand for IKEA 365+ dry box

Added a chamfer to fit the IKEA 365+ 10.6L box and spacers to sit securely between the legs of the IKEA 365+ drybox project. It's made for the ThermoPro TP157 thermometer which is nice and compact and most importantly uses AAA batteries…

Order a print of this model

Printables

PrimeFilm 3650u scan head carriage replacement

The carriage for the PrimeFilm 3650u, and possibly the 1800 and 3600, are held to the CCD carriage with a metal pin, and are prone to cracking where the pin passes through the carriage. Needs supports to print. The example shown was…

Order a print of this model

Printables

9mm Follower Compatible with Promag Compatible with Sig P365 Magazines

This follower replaces the OEM follower in promag sig-compatible p365 magazines. This follower actually works, where as the OEM one jams and tilts. I can't believe promag released theirs to production as it totally doesn't work and…

Order a print of this model

Printables

Hygrometer addon for IKEA365+

I printed it face down with PETG 0.4 nozzle and 0.2 layerhight

Order a print of this model

Printables

4" dust port for Ridgid Table Saw TS-3650

A table ought to have ~400 CFM of dust collection. The Ridgid Table Saw TS-3650 comes with a shop-vac sized dust port, and while that helps, a shop vac is lucky to pull even half that air flow. This replacement port allows the full flow…

Order a print of this model

Printables

Drybox Ikea 365+ 10.6l & autorewind (and not) spoolholder

I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…

Order a print of this model

Printables

Xiaomi M365 Security Lock Ring

Because this ring alrady broke twice I created a more stable version myself. In my opinion It is much more stable than the original. The original tapers slightly downwards, which I have not implemented because it is not necessary. Print…

Order a print of this model

Printables

Mi Scooter Display Protector Frame (m365 and 1s)

Keeps the standard mi scooter display protector from falling off and shifting around

Order a print of this model

Printables

E-scooter handle for Xiaomi Pro 2/Pro/M365/1S/Lite

With this practical hook for the Xiaomi E-Scooter, you can always carry your luggage safely. The accessory is compatible with the Xiaomi Pro 2, Pro, M365, 1S, and Lite and can be easily attached. Use it to transport your bags, backpacks,…

Order a print of this model

Printables

Ikea 365+ 180ml Holder

Ikea 365+ 180ml Holder for kitchen drawer

Order a print of this model

Printables

guide rail for IKEA 365 plastic boxes

guide rail for IKEA 365 plastic boxes Führungsschienen für die IKEA 365 Boxen

Order a print of this model

Printables

Mag holder for sig sauer p365

I printed this at 15% infill

Order a print of this model

Printables

IKEA 365+ Filament Dry Box & Spool Holder (improved supports and air circulation)

the missing files can be found in the original model

Order a print of this model

Printables

Sig P365 Striker/Backplate Removal+Install Tool

Use the short wedge to push the striker cylinder nub inwards, and the long wedge to push the nub downwards. The other part is used for reinstallation of the striker and backplate. See…

Order a print of this model

Printables

Sig P365 Macro 10rd Baseplate Adapter

Baseplate adapter to make 10rd p365 magazines compatible with the macro grip. Mainly designed for compliance in 10rd limited states. Can be printed standing up, or on its side. Recommended 4+ walls.

Order a print of this model

Printables

Wall mount for Fab365 Millennium Falcon

Simple wall mount for the Fab365 Millennium Falcon. Press the mount in the falcon holes. It's a little bit thight but it should be to hold it firmly enough.

Order a print of this model

Printables

Eldricht Horror Box Organizer tunings (https://www.thingiverse.com/thing:3655672)

Some tunings to dc222's models. I've made 3 different category changes to some of the parts: Visual - just generic stuff that have only visual impact Technical - changes related to printing the parts Functional -changes related to the…

Order a print of this model

Printables

ASKO dishwasher - 474365 Spray arm holder lower

Print out of something higher temp. PLA+ will deform. ASA at 270C worked well Update 23 January 2026 - Updated with slightly changed dimensions and better retention ring.

Order a print of this model

Printables

Silica gel container for Dry Spool Box - Ikea 365

Silica gel container for 1-3KG Dry Spool Box - Ikea 365 10.6L

Order a print of this model

Printables

IKEA 365+ Food Jar Holder Large (alch grid)

A holder for the IKEA 365+ Food Jars, this one is for the taller version. The holder is made for the storage grid made by Alexander Chapel (alch.shop) and takes up 2x4 grids. I was sick of all the storage jars sliding around in the drawers.

Order a print of this model

Printables

Spacer Xiaomi 365 (Damping rubber)

Strut for xiaomi 365 scooter or analog. 2 files, 0.8 mm and 1 mm

Order a print of this model

Printables

Strainer for Ikea 365+ rectangular food container

Order a print of this model

Printables

Dual spoolholder for ikea 365

I'm trying to introduce my students to the 3R's and I thought to lead by example with a reuse, repurpose example they can see live in class and that I could use at home. With this system you can use all the parts of a normal prusa mini…

Order a print of this model

Printables

Xiaomi M365 / Pro2 rear fender

Xiaomi M365 / Pro2 rear fender for 10 inch, 8cm wide tire Printed on Creality k1 max (300x300 bed) Slicer will ask to rescale it at first but select no, and rearange the part to fit the bed. Printed at 0.4 mm nozzle PLA (Abs recomended)…

Order a print of this model

Printables

Ikea 365+ Clean Resin print

Had need of support jast on base, the upper part can be print without

Order a print of this model

Printables

Protector para pata xiaomi m365 pro

Diseño para proteger ante arañazos la pata del xiaomi m365 pro. Imprimir preferiblemente con filamento flexible.

Order a print of this model

Printables

Xiaomi M365 Fender Hook

Remixed this fender hook for my Xiaomi Mi M365 Pro (will work with standard M365 too) with Fusion360 to be mounted with M5x20mm bolt and M5 "nylock" nut (so it doesn't come loose). My original hook got ripped off the fender (original bolt…

Order a print of this model

Printables

Xiaomi m365 Adaptador para linterna

Este adaptador esta creado con el fin de cuando, se rompa el foco original del Xiaomi m365 poder tener una linterna.

Order a print of this model

Printables

3650 Motor Mount for RC Boat

I printed it with the face touching the motor on the print bed and it broke after just a few minutes. I was also using PLA so it was bound to fail… This should work with any motor that uses M3 bolts mounted on a 25mm circle. Print with as…

Order a print of this model

Printables

Boite Rangement 365 Aventures – Le Donjon

Une boite à glisser dans le calendrier de 365 Aventures – Le Donjon pour ranger ses dés, son crayon et autre chose si nécessaire

Order a print of this model

Printables

Undermount Magazine Holder for Sig Sauer P365 or P365XL

Undermount or wall-mounted magazine holder for Sig Sauer P365 or P365XL. countersink sized for flat-head #6 x 3/4" screws (3.5 mm x 20 mm in metric) originally printed with PLA, "structural" preset dialed for snug fitment and quick…

Order a print of this model

Printables

IKEA 365+ DryBox for 1-3kg spools

You need: 8x Bearing 608z 2x Shaft 8 mm if you print 2 half part, you also need 4x screw M3*40 Sealant for joining the two halves and creating a gasket between the container and the bottom part You need to print: 1x DryBoxBodyMainFull or…

Order a print of this model

Printables

Drybox Ikea 365 10.6l Container

I needed to fit 2 Formfutura Spools. (78 mm wide) You'll need a bit of M3 Hardware, two lengths of PTFE tubing and for better hold, 8 6x3 mm magnets (had them still from the clicky probe stuff) An M5 threaded rod and two nuts are also…

Order a print of this model

Printables

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Trichter

Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…

Order a print of this model

Printables

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Deckel

Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…

Order a print of this model

Printables

Fixdry NT1 to IKEA365 adapter

Adapter for using IKEA365 10.6l container as a lid for Fixdry NT1 dryer. Benefits: Enables using large diamater 3kg spools (e.g. eSUN). Material: ASA or other high-temp material recommended. Notes: When setting up drying time, please add…

Order a print of this model

Printables

P365/TLR7sub "Gaspedal" V2 - NiSE V3 Remix

Minor alterations

Order a print of this model

Printables

P365/TLR7sub "Gaspedal" V2 - NiSE Remix Alt Ver

Basically just changed the shape of where your thumb goes to a more standard angled design. Both shorter and longer versions are available.

Order a print of this model

Printables

P365/TLR7sub "Gaspedal" V2 - NiSE Remix V4

This is a modified version of Austin Lively's p365 tlr7sub mounts to tight up the mounting and better suit my personal preferences. I settled on this length after trying out a few variances because it's the largest shelf that can be added…

Order a print of this model

Printables

Tokaido Collector's Edition Insert (365mm x 365mm box)

A design for Tokaido CE that allows everything to have its place with room for all the expansions and promos, including room for the Felicia promo character, which you can find a mini for on BGG in the Files section for the promo here.…

Order a print of this model

Printables

m365 pro2 ledstrip

I did this with what I had at home This is the first version diy led strip holder for M365 pro2 need: HARDWARE: bl-5j battery Wire,solder..... led strip (5m-60-ip67) :…

Order a print of this model

Printables

Variable Size Cuvette Holder for Perkin Elmer Lambda 365 UV-Vis Spectrometer

This cuvette holder was designed to fit in a Perkin Elmer Lambda 365 UV/Vis spectrometer for single and double light path measurements with cuvettes of variable path length of up to 100 mm. It can easily substitute the standard Single…

Order a print of this model

Printables

Mocowanie Lampki Do Amortyzatora Hulajnogi np. Xiaomi m365/Pro

bez mocowania na nakretke

Order a print of this model

Printables

Microsoft Dynamics 365 Business Central logo

Quick update on Microsoft Dynamics 365 Business Central logo by waldo. Can be printed in five parts. Category: Signs & Logos

Order a print of this model

Printables

Roll holder for ikea 365+ 10.6L / 11qt container

Meant for this specific one container from ikea. Add some silica beads in the free space and you have a nice dry box. You can reuse the same piece of tubing for lubrication that the standard voron 2.4 build required of you, just a bit…

Order a print of this model

Printables

Hygrometer Addon for Ikea 365+ 10.6l Dessicant Lid

For people who are using https://www.printables.com/model/185335-filament-trockenbox-filament-dry-box and wants to add a circular hygrometer that is removable and is installable and also non-destructive. I have created a hygrometer…

Order a print of this model

Printables

Configurable Cable Protector for M365 and similar Scooters

Configurable for up to three single or double cables. The stl files are for an additional 2 x 2.5mm² (14AWG) cable (external battery pack) For Xiaomi Mija M365, 1S, Pro2 and similar E-scooters. Use soft TPU filament.

Order a print of this model

Printables

T Slide for Rigid Table Saw TS3650

I designed this slide to fit my Rigid TS3650 table saw to use the featherbaord and printed it in PETG (PLA would work well). I made it for the 6mm version of the featherboard and used a 50mm bolt with the knobs in the original build and…

Order a print of this model

Printables

IKEA 365+ 10.6l Wall Mounts

IKEA 365+ 10.6l Wall Mounts - 16mm Pipe for more strengh

Order a print of this model

Printables

Table Saw Vertical Rail Holder-Rigid TS3650 for Featherboard and Accessories

Adapted RailHolder and Slide for Rigid TS3650 10" table saw with miter fence. The original model I found and printed had the wrong channel size, so I had to create this one to match the channel on my fence. Use two of the 6mm knobs for…

Order a print of this model

Printables

IKEA 365+ 10.6l Filament Storage with deisccant box

I use Ikea 10.6l containers, to store all my filaments, and this model, helps keeping them in place, and not wobble around. I really liked the original model, but wanted to use some of the desiccant beads I have, to keep the filament dry,…

Order a print of this model

Printables

Trailer hitch for Xiaomi M365

Trailer hitch for Xiaomi M365 that you fix to the rear fender with a pin or a screw. The other part is made for a homemade trailer.

Order a print of this model

Printables

Ikea 365+ Box changeable Label

I needed a way to organize my filament in my Ikea 365+ boxes. So I designed a filament label holder with filament names.

Order a print of this model

Printables

Brake disc protector with integrated light XIAOMI M365 ULIP

here is a disc protector with integrated light for xiaomi M365 for ULIP suspension only.

Order a print of this model

Printables

Sig Sauer P365 Stand

Simple stand for a P365. It's a small gun so I made it smaller than most other models I could find and it stands perfectly.

Order a print of this model

Printables

Festool / Tanos Systainer Mini T-Loc Einsatz 24 Fächer Insert 24 Boxes Cases für 499622 / 203813 / 80101365 SYS Mini

Einsatz mit 24 Fächern für die "alten", kleinen T-Loc Mini Systainer. Insert with 24 compartments for the "old", small T-Loc Mini Systainers. Passt NICHT in die neuen Festool Systainer³ SYS3 S 76 NOT compatible with Festool Systainer³…

Order a print of this model

Printables

Lid repair clip for IKEA-365

Keep using your IKEA-365 lid after the side latching-tabs break with this clip.

Order a print of this model

Printables

Xiaomi Mijia M365 mudguard rubber plug

Xiaomi Mijia M365 mudguard rubber plug Print with TPU Ender3 needs small extruder modification to print with TPU. Find it here https://www.thingiverse.com/thing:2144277 Print Settings Printer Brand: Creality Printer: Ender 3…

Order a print of this model

Printables

rear mudguard Xiaomi M365

rear mudguard without light for xiaomi M365 with ULIP suspension

Order a print of this model

Printables

Dry box insert IKEA 365+

Silica gel ( i used wisedry changes color when saturated) Hygrometer Spool box mount https://www.printables.com/model/487842-dry-box-filament-roller-insert-ikea-365 roller bar

Order a print of this model

Printables

IKEA 365+ - Gift pack (Bottom / Upper) LID

I made a stopper for the IKEA 365+ decanter and a stand for the Christmas package in which I placed the liqueur for the clinicians and guests :). You can see everything in the pictures on how :) And how it looks afterwards when put…

Order a print of this model

Printables

IKEA 365 SKADIS bigger container

I like to use this model https://www.printables.com/model/48495-ikea-365-food-container-mount-for-the-ikea-skadis- But there was no version for the bigger / rectangle ones like these So I made it. This model also uses the Skadis_Universal…

Order a print of this model

Printables

DB BR365 diesel locomotive compatible with IKEA, BRIO

DB BR365 diesel locomotive compatible to IKEA, BRIO, etc. wooden railways. Required non-printed parts: 2x magnet ø 6mm x 3mm 12x screw M2 x 4mm 8x screw M2 x 10mm Building instructions Step 1: Attach the front to the base by use of 2x M2…

Order a print of this model

Printables

Gridfinity Ikea 365+ Food Container (750ml) Holder

A Gridfinity holder for Ikea 365+ food containers in 750 ml size. Uses 4x4 standard size (42 mm) units, supports magnets. For minimal print time and material use, I recommend printing without bottom layers, 5 % infill on draft quality…

Order a print of this model

Printables

Magazine Sleeve Adapter for Sig Sauer P365X / XL grip and FUSE 21-round mag

This is a Magazine sleeve adapter for P365 FUSE 21rd mags. It is designed for the standard base plate that comes with P365 9MM 21RD MAGAZINE. It closes the gaps and improves grip when used with Sig Sauer P365X/XL grip frame. It should not…

Order a print of this model

Printables

IKEA 365+ Kitchen Knife large

3D scan of my large IKEA kitchen knife for modelling of drawer inserts or knife blocks. Scanned with Creality Scan Otter

Order a print of this model

Printables

small IKEA 365+ knife

3d scan of a small IKEA kitchen knife as reference. Scanned with Creality Scan Otter and AESUB permanent scan spray.

Order a print of this model

Printables

Rangement dés et stylo pour le jeu "Le Donjon 365 Aventure"

Order a print of this model

Printables

Doc Green (Xiaomi M365, Pro and Mijia) E-Scooter Anti Vibration Damper 0.2mm to 2mm

Designed specifically for the Doc Green ESA 5000 (Xiaomi M365 / Pro clone) E-Scooter (periodically sold by Lidl) but potentially compatible with the Xiaomi M365, Pro and Mijia versions too (no guarantees however). These Vibration…

Order a print of this model

Printables

Airtag Action M365 Protection disque

Une protection du disque arrière pour la trottinette Xiami m365 avec emplacement d'airtag de chez action (Balise connectée Fresh ’n Rebel) C'est bien moins chère que le airtag de chez apple ;-) Impression avec support Il faut ouvrir le…

Order a print of this model

Printables

Holster for Sig P365 - Fits Lima & Foxtrot 365 Light

This is a TPU holster for the Sig Sauer P365. It will also fit with the Lima 365 and Foxtrot 365 light. There are three files. Two are for the holster with V3 being more rounded and streamlined than V2. The third file is comprised of 5…

Order a print of this model

Printables

IKEA 365 Food Container Lid

It's a simple lid for the round Food Containers of the IKEA 365+ series. Easy to print and works with: Food container, round/glass, 400 ml • 503.591.95 Food container, round/glass, 600 ml • 503.591.96 Food container, round/plastic, 450 ml…

Order a print of this model

Printables

P365X Rear Irons Plate

A modified model with integrated sights and a flat bottom for compatibility with models without rear iron dovetails. You can use M3x8 bolts to hold it down

Order a print of this model

Printables

Tofu etc. press for ikea 365 chopping board.

Tofu press designed to use ikea 365 chopping board for food contact surface. Carving out a slot on the base chopping board allows water to flow off the board into a sink etc.. Fits two ~400g blocks of tofu. Two versions of the screw are…

Order a print of this model