IBM System x3650 M4 2.5" Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2.5" HDD/SSD toolless hotswap tray for some IBM servers.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 295
- Makes
- 2
- Views
- 1,352
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Compatible for (at least) these IBM servers:
- X3550 M4
- X3630 M4
- X3650 M4
- X3850 X5
- X3950 X5
Fits 2.5" HDDs and SSDs with a maximum height of 15mm.
Included is a version that requires (countersunk) screws and a screw-less one that clips into place without screws.
Due to the tight clearances in the server, the screws need to have a very shallow head. The screw-less version clips onto the drive, but this requires good tolerances on the 3D print.
The tray is held in the server with friction, so pushing them in or pulling them out might require a bit of force. If the fit is too tight, the tabs on the side can be sanded down a bit to reduce the friction.
I took some measurements from this model: https://3dtoday.ru/3d-models/gadgets/computers/salazki-ibm-lenovo-25-hdd-tray-caddy-for-ibm-x3850