1 / 13
IKEA 365+ Filament Dry Box & Spool Holder — image 1
1 / 13

IKEA 365+ Filament Dry Box & Spool Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This an insert for IKEA boxes to store filament spools in a dry environment. You can also print directly from the boxes.

Rating
4 / 5
Likes
81
Downloads
577
Makes
3
Views
5,759
Reviews
5

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

So i modeled an insert for IKEA 365+ boxes.

I made it so that there are about 250g of silica beads stored in the tray directly underneath the filament spools. You can also put those little packs of silica gel (which come packaged with new filament) in those cutouts in the front and back. This way they cannot interfere with the rollers.

The spools are placed on the rollers and they are sitting there verry securely.

The hole in the Front piece is made to accomodate on of those round hygrometers. I only have the ones, where the locating nubs are on 45° but it should also fit the ones which are straight up ad down.

If you want you can attach the FilamentGuide piece to the front or back of the box, so you can print directly from the box. If you want to do that, you will need two fittings “PC4-M6”. You also have to tap the holes in thy FilamentGuide piece with an M6 tap.

The Rollers fit 8 standard 608 ball bearings (skateboard/ inline skate bearings).

The axles are 8mm in diameter and 160.67mm in length, but you can also use Ø8mm steel rods, and cut them to lenght if you want.

The Box and Lid you will need are shown in the pictures.

 

I printed most of the parts in PLA or PETG, but anything should work fine.

I recommend using 2 or 3 walls and 15% infill on everything exept the axles, there i used 4 walls and 25ish% infill.

You will also need supports for several parts, but that shouldn't be an issue.

I recommend printing the 4 Rollers and the 2 Axles upright.

Print the FilamentGuide in the orientation, that you will install it in.

Print the Front part laying on it's back.

The Tray and the SpoolHolder are pretty straight forward.

 

Have fun with the model and happy printing :)

Tags