1 / 2
Shelf support pin (3mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal reinforced shelf support pin for 3 mm hole
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Should fit a 3mm hole, the pin diameter is 2.85mm.
I used PLA+, but PETG should do the job too.
For stiffness and strength use 100% infill, layer height 0.12mm.
You can easily print it vertically, but for heavy shelves it's better to print it on a side with snug supports.