1 / 8
Baofeng UV 5RH PRO, UV 5RM Battery adapter for 18650 — image 1
1 / 8

Baofeng UV 5RH PRO, UV 5RM Battery adapter for 18650

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Battery adapter for the baofeng UV-5RH PRO, it use 2x18650 batteries insted of the original one.

Rating
0 / 5
Likes
15
Downloads
48
Makes
0
Views
361
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This is a custom battery adapter for the Baofeng UV-5RH PRO. It allows you to power your radio using two 18650 Li-ion batteries instead of the original battery. 

I recomend printing it in PETG or ABS for better durability compare with PLA 

Materials:

  • 4x M2x10mm

  • 2x M2x4mm (Note: You might need to trim these slightly shorter than 4mm for a perfect fit).

  • Wiring: A few centimeters of thin copper wire for internal connections.

  • Contacts: For the metal connectors, I made them using streaps of metal from a tuna can. You can use any conductive spring steel or copper tabs you have on hand.

Installation: 

  • Bottom Section: Clamp the wires using the screws, ensuring a solid contact with the metal strips.

  • Top Section: Repeat the same process. Pass the wire through the hole, guide it through the internal channel, and secure it with the screw while ensuring contact with the metal strip.

  • Important: Be careful with the length of the screws. If the screw protrudes too far from the surface, it may damage the radio's connectors. Trim them if necessary.

  • You may need to secure the battery adapter with a zip tie in the bottom, as shown in the imagen.

This is a DIY project involving lithium batteries and electronic equipment. Use this adapter at your own risk. I am not responsible for any damage to your radio, batteries, or personal property caused by improper assembly, polarity reversal, or misuse of this adapter. Always verify your voltages and connections with a multimeter before connecting it to your Baofeng.

Tags