1 / 2
Double AA battery testing case with screw terminals
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can customize whether you want the batteries in parallel or series.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 35
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
You can customize whether you want the batteries in parallel or series. It is reccomended you print the contact retainer at 0.10mm layer height (or use a smaller diameter nozzle). Here are the hardware I used for this model:
Battery contacts: 50pcs AAA Battery Positive-Negative Conversion Contact Spring Nickeling Plate 10x9mm
Screw terminals: 50pcs PCB Mount Screw Terminal Block Connectors 5mm Pitch (2P 30pcs,3P 10pcs,4Pin 10pcs)
You have to bend the pin on the terminal block. It should be a press fit
