American Optical 569-72 Scope Head Riser (shorter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds some height for using a 0.5x barlow lens with similar AO stereo scopes
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I printed the bottom ring at 100% infill, and the whole model with 3 perimeters.
I find that even with that and the other bolstering mods, I can still rotate the microscope with enough force, but it's much better than it was. I used Elegoo Rapid PLA+, maybe a different PLA would flex less. It holds well enough, and I don't notice it while using the microscope
I used an M4 threaded insert, but the original author used an M5 screw, and if you have a spare set screw that's the same as the one that the stand has, that one worked for me as well