Tiny Table Vise Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a compact 3D‑printed vise-style PCB holder, designed for electronics work such as soldering.
- Rating
- 0 / 5
- Likes
- 82
- Downloads
- 288
- Makes
- 0
- Views
- 1,344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a compact 3D‑printed vise-style PCB holder, designed for electronics work such as soldering, inspection, assembly, and small mechanical tasks. The design is fully printable on any standard FDM 3D printer and requires no special hardware unless optional metal inserts are added.
Features
1. Dual‑Jaw Clamping System
One fixed jaw integrated into the base.
One sliding jaw driven by a threaded screw.
Smooth clamping action suitable for PCBs, small parts, and precision components.
2. Gear‑Style Adjustment Knob
Provides excellent grip and torque for manual tightening.
Easy to operate even with gloves or slightly oily hands.
3. Printable Threaded Screw
Optimized for PLA/PETG durability.
Compatible with M8/M10‑style tolerances depending on slicer settings.
4. Stable Mounting Base
Flat base with a mounting hole for m4 screws.
Can also be used free‑standing on a desk.
Recomend using anti‑slip pads or adhesive feet.
Recommended Print Settings
SETTING | |
|---|---|
Infill | 40–60% (Grid, Gyroid, or Cubic) |
Walls | 3–4 perimeters |
Supports | Only under overhangs >50° |
Print speed | 40–60 mm/s |
Cooling | On for PLA, moderate for PETG |
Layer height | 0.2 mm (0.1 mm for high detail) |
Suggested Materials
PLA+ (Recommended for general use)
Easy to print
Good dimensional accuracy
Suitable for light to medium clamping force
PETG (Recommended for durability)
Higher strength and flexibility
Better resistance to repeated tightening
Slightly more difficult to print
ABS / ASA (Optional)
Strong and heat‑resistant
Requires enclosure
Best for workshop environments
Design Details
Gear Knob
Diameter: 30x30mm
Teeth: 34 evenly spaced
Grip texture: radial ridges
Center hole: matched to printed screw shaft
Threaded Rod
Large, deep threads to reduce wear
Jaws
Reinforced with ribs to prevent cracking
Smooth inner faces to avoid PCB damage
Post‑Processing Suggestions
Light sanding of the screw threads for smoother rotation
Optional silicone grease for long‑term durability
Add rubber pads to the jaws for delicate components
Heat‑set inserts can be added for extreme durability