Simplified Spray Bottle Holder for Honeycomb Storage Wall!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HSW Spray Bottle Holder remixed for faster and stronger printing with an M3 screw to mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the Spray Bottle Holder by zhollis21 and Ellrico in an attempt to make it simpler to print and improve strength. I like the simplicity of the base design but was not fond of the snap-in honeycombs and how they complicated printing the object.
I decided to make this design more modular and require only a single M3 honeycomb insert and increased the rear wall thickness of the print to accommodate it. Afterwards, I realized it would be a great candidate for a 45 degree print angle so I cut the model so it would easily lay down at that angle.
Model shown is printed with Sunlu Matte Purple PLA and my temps were a bit high as you can see all the wisping. I printed 4/4/4 perimeters/top/bottom layers and it is FAR stronger than it needs to be.