1 / 4
Filament Dryer Side Shelf | Polymaker | Sunlu | Cereal Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts filament dryers beside the Prusa enclosure, works with stacked setups.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This side shelf is compatible with the Polydryer, Extrutim’s DryBox, and the Sunlu S2.
Using the Sunlu S2 requires a DC power cable with a right-angle connector.
BOM:
5x M3x5x4 Heat inserts
3x Screw M3x8
2x Screw M3x6
optional for Sunlu S2: DC 5,5 x 2,1 mm Adapter
Aliexpress
The filament guide used in this setup:
Extrutim Drybox
Polydryer
Sunlu S2
Note: The Sunlu S2 requires a right-angle adapter for use on this side shelf.
Carefully trim a small amount of plastic from the connector using a utility knife so it can fully seat in the Sunlu S2.
The image shows the difference between the modified and unmodified connector.
Happy Printing!